光学学报, 2001, 21 (10): 1245, 网络出版: 2006-08-10   

光纤几何参数的自动检测仪

Automatic Measurement of Optical Fiber Geometric Parameters
作者单位
1 南京理工大学电光学院,南京 210094
2 上海电缆研究所,上海 200093
摘要
叙述了光纤几何参数的自动测试方法.光纤断面通过显微光学系统成像,由CCD摄像头接收,并通过图像采集系统传输到计算机中,供进一步处理.介绍了测量原理及数学模型,采用了图像增强、图像分割等处理技术,消除图像噪声,从光纤断面图像中提取有效信息.采用不同的算法,精确计算了光纤几何参数,编制了实用化软件.提供了实测结果及二、三维图示.根据上述原理与技术研制的仪器,操作简便,测量精度高.
Abstract
An automatic method of measuring optical fiber geometric parameters is described. The end face of the fiber is imaged by a microscope and recorded by a CCD camera, and then the image is transferred to a image grabber plugged in a microcomputer for further analysis. Several digital image processing methods are used to remove the noise in fiber image. The image segment algorithm is used to extract feature datapoints. The data is analyzed by using different algorithms to give the geometry parameters of the fiber. Sophisticated software is programmed. An instrument developed based on the hardware and software described above can be operated conveniently with high accuracy.

陈磊, 陈进榜, 陆润华. 光纤几何参数的自动检测仪[J]. 光学学报, 2001, 21(10): 1245. 陈磊, 陈进榜, 陆润华. Automatic Measurement of Optical Fiber Geometric Parameters[J]. Acta Optica Sinica, 2001, 21(10): 1245.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!