中国激光, 2004, 31 (6): 575, 网络出版: 2006-06-12  

激光切割工艺参数的智能选择系统

Intelligent System for Selecting Laser Cutting Parameters
作者单位
1 北京工业大学激光工程研究院, 北京 100022
2 河南凯达国贸公司,河南 郑州 450008
摘要
提出用试验设计与人工神经网络相结合的方法, 建立了一个激光切割工艺参数的选择优化的智能系统。通过试验设计的方法,只需做少数几次切割试验,将试验结果输入人工神经网络中进行训练和学习,系统便可经过自学得到切割结果与切割参数之间的隐含的定量关系,获得切割知识。在实际切割时,系统根据学到的切割知识,可以对任何给定的切割条件进行推理,对切割参数进行结果预测和优化。这种方法既不需要做大量的工艺试验,也不是单纯的专家经验,而是结合了两者的优点,使结果预测建立在既有试验数据又有专家知识的基础上,因而更加可靠、准确。该系统在激光方位切割的具体应用表明,系统能够准确给出定量的加工参数。
Abstract
In laser cutting, many factors influence cutting quality. In this paper an intelligent system has been developed in order that the cutting parameters can be created quantitatively. This system is different from database and normal expert system. It combines factor experiment method and artificial neural network (ANN). Only a few tests are required to obtain basic data and then the test results are input into the ANN system. After the ANN is trained and learns from the test results, the system can produce laser cutting knowledge and optimized parameters. Based on test data and knowledge the cutting parameters given by the system will be more accuracy and reliable. Finally the intelligent system is applied to select 3D position laser cutting parameters. It shows the system being very effective and useful.

陈继民, 肖荣诗, 左铁钏, 王跃文. 激光切割工艺参数的智能选择系统[J]. 中国激光, 2004, 31(6): 575. 陈继民, 肖荣诗, 左铁钏, 王跃文. Intelligent System for Selecting Laser Cutting Parameters[J]. Chinese Journal of Lasers, 2004, 31(6): 575.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!