强激光与粒子束, 2005, 17 (2): 295, 网络出版: 2006-04-28  

拉瓦尔喷嘴的气流线质量及密度分析

Study of the gas-puff line mass and density from Laval nozzle
作者单位
西北核技术研究所,怦西,西安,710024
摘要
喷气负载是高功率Z箍缩的主要负载之一.应用一维等熵压缩气体动力学,分析了"强光一号"加速器拉瓦尔喷嘴的基本物理过程,获得了拉瓦尔喷嘴出口处气流的马赫数,Ma=4.6,并对其进行了修正,修正值为3.5.利用由雪耙模型导出的Z箍缩聚爆时间表达式,并结合"强光一号"Z箍缩实验结果,修正了由一维等熵气体动力学得到的喷嘴气流线质量表达式.最后根据已知气流的线质量40μg/cm,利用B-T模型初步估算了喷嘴的气流密度分布.估算结果为:在轴向2.5~40 mm,径向0~15 mm的区域内,气体分子密度基本在1016~1017/cm3,且在轴向2 cm内基本形成空心的气体壳层结构.
Abstract
The gas puff is one of the main loads used in Z pinch research. In this paper the basic physics process of the Laval nozzle on Qiangguang I generator is analyzed using one dimension isentropic gas dynamics equation.The Mach number 4.6 of the gas flow is calculated and corrected as 3.5 considering the effect of boundary. Combining the data of gas puff Z pinch experiments on Qiangguang I generator, the expression of the line mass is obtained using the implosion time expression which is deduced from snow-plow model. In the end of the paper the distribution of the gas density is given by the Bollistic-Transport (B-T) model and the gas density is between 1016/cm3 and 1017/cm3. Along the axis within 2 cm, a hollow gas shell structure is formed.

王亮平, 邱爱慈, 蒯斌, 丛培天, 郭宁. 拉瓦尔喷嘴的气流线质量及密度分析[J]. 强激光与粒子束, 2005, 17(2): 295. WANG Liang-ping, QIU Ai-ci, KUAI Bin, CONG Pei-tian, GUO Ning. Study of the gas-puff line mass and density from Laval nozzle[J]. High Power Laser and Particle Beams, 2005, 17(2): 295.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!