介绍了用于惯性约束聚变分解实验的铝调制靶的制备.以半导体光刻工艺结合化学腐蚀工艺在铝箔表面引入周期为50 μm的条槽图形,研究腐蚀条件对腐蚀速率的影响;采用光学显微镜、扫描电镜和台阶仪对图形形貌和样品表面成分进行测量和分析,获得厚度在32 μm左右、腐蚀深度达到20 μm的铝调制靶.

The aluminium modulation target used to study the Rayleigh-Taylor instability in the resolved experiments of Inertial Confined Fusion(ICF) was fabricated.Based on semiconductor photolithography technology and chemical wet etching process,the stripe pattern of line width 25 μm on aluminium foil surface was obtained.The effects of the reaction conditions on the etching rate were studied.The pattern topography and the surface constituent were measured and analyzed.Aluminium modulation targets of about 32 μm thick were prepared and the etching depth reached up to 20 μm.