强激光与粒子束, 2004, 16 (7): 883, 网络出版: 2006-05-15
充气温度对PS-PVA-CH塑料微球性能的影响
Effects of the gas-filling temperature on the PS-PVA-CH hollow plastic microsphere properties
PS-PVA-CH微球 惯性约束聚变 充气 充气平衡温度 PS-PVA-CH microsphere Inertial confinement fusion（ICF） Gas-filling Gas-filling temperature
摘要
主要研究了PS-PVA-CH空心塑料微球充气时,充气平衡温度对微球强度、球形度和表面形貌的影响.对PS,PVA和CH材料的热重分析结果表明,PS和PVA具有较高的分解温度,而PS-PVA双层球和PS-PVA-CH塑料微球升温后的耐外压实验表明,温度升高后双层球耐外压强度降低很快,不能满足充Ar气需要;而3层球在100～120℃仍有很高强度,在该温度下,可以实现充Ar气.微球表面形貌分析结果显示,高温充气后,3层球表面粗糙度升高.
Abstract
The basic target used in many inertial confinement fusion(ICF) experiments is a hollow microsphere of glass or plastic. Generally, the hollow plastic microsphere is composed of three layers: polystyrene(PS), polyvinyl alcohol(PVA) and carbon hydrogen(CH).This paper focuses on the filling-gas temperature effects on the PS-PVA-CH hollow plastic microsphere properties such as the shell strength and the surface quality. Experiments show that although the material of PS and PVA has high decomposed temperature the strength decreases rapidly as the temperature increases. The PS-PVA shell strength is not enough for Ar-filling. After coating the CH ablator the microsphere can be filled with Ar at 110℃.
张占文, 李波, 王朝阳, 陈素芬, 冯建鸿, 刘元琼, 高党忠, 师涛, 林波, 初巧妹, 魏胜, 黄勇. 充气温度对PS-PVA-CH塑料微球性能的影响[J]. 强激光与粒子束, 2004, 16(7): 883. ZHANG Zhan-wen, LI Bo, WANG Chao-yang, CHEN Su-fen, FENG Jian-hong, LIU Yuan-qiong, GAO Dang-zhong, SHI Tao, LIN Bo, CHU Qiao-mei, WEI Sheng, HUANG Yong. Effects of the gas-filling temperature on the PS-PVA-CH hollow plastic microsphere properties[J]. High Power Laser and Particle Beams, 2004, 16(7): 883.
PDF全文
