强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大,理论计算了0.5～2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数,并且还计算了0.4～1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数.计算结果表明,随着入射角的增大,靶材表面层单位质量中沉积的能量增大,电子在靶材料中穿透深度减小,能量沉积系数减小,相应的束流传输系数也减小;能量为0.5～2.0MeV的电子束当入射角在60°～70°时在材料表面层单位质量中沉积的能量较大.

The incident angles have a heavy effect on the intense pulsed electron beam energy deposition profile, energy deposition fraction and beam current transmission fraction in material. This article presents electron beam energy deposition profile and energy deposition fraction versus electron energy(0.5-2.0MeV), at various incident angles for three aluminum targets of various thickness via theoretical calculation. The intense pulsed electron beam current transmission fractions versus electron energy(0.4-1.4MeV) at various incident angles for three thickness of carbon targets were also theoretically calculated. The calculation results indicate that the deposition energy in unit mass of material surface layer increases with the rise of electron beam incident angle, and electron beam with low incident angle (closer to normal incident angle) penetrates deeper into the target material. The electron beams deposit more energy in unit mass of material surface layer at 60°～70° incident angle.