光子学报, 2005, 34 (7): 1078, 网络出版: 2006-06-12   

红外热成像鱼眼镜头设计中若干特殊问题的处理

Some Key Problems about the Design of IR Thermal Imaging Fish-eye Lens
作者单位
军械工程学院光学与电子工程系,石家庄,050003
摘要
提出鱼眼镜头光阑球差的级数表达式及其基于有限差分的近似计算方法,解决了通常的光阑倒追方法面临的难题;讨论孔径光阑与入瞳的特殊"共轭"关系,分析了光阑彗差和像差渐晕;运用Aitkin插值技术填补"溢出"光线在像面上的落点,以保证像质函数定义的一致性,维持自动优化持续进展,从而克服频繁的光线"溢出"造成的严重困难;提出充分利用像差渐晕改善像面照度均匀性的方法;论述标定轴外光束边界的逐次渐近过程和运用入瞳距离变量实现孔径光阑位置全域优化的技术.
Abstract
The series formula and its corresponding differential equation of fish-eye lens′ stop spherical aberration have been brought forward. Calculating the approximation of the stop spherical aberration according to these formulas,and then adopting iteration, we can confirm the entrance pupil′s position and primary ray accurately. Furthermore,it analyzes the stop′s coma,discusses the special “conjugate” relation between aperture stop and entrance pupil, and how to improve the uniformity of image plane illuminance by using aberration vignetting.Ray′s total reflection or no-intersection at refracting surface is called “ray overflow”.Frequent ray overflows in the optical automatic design of fish-eye lens makes its CAD very hard.Using Aitkin Interpolation to fill up the intersection points of overflow-rays at image plane can ensure the optimization process persistently to go along,and then clearing up the overflow gradually.In the end,it expounds the successive approach method to confirm the boundary of abaxial beams,a

王永仲. 红外热成像鱼眼镜头设计中若干特殊问题的处理[J]. 光子学报, 2005, 34(7): 1078. 王永仲. Some Key Problems about the Design of IR Thermal Imaging Fish-eye Lens[J]. ACTA PHOTONICA SINICA, 2005, 34(7): 1078.

本文已被 10 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!