中国激光, 1997, 24 (7): 600, 网络出版: 2006-10-31
制作粗糙度参数可控表面的理论及实验研究
Theoretical and Experimental Study on Fabricating Rough Surfaces of Known Statistical Parameters
摘要
分析了用光刻胶记录激光散斑来制作粗糙度参数可控表面的方法,并成功地制作了一批样品。这些样品表面具有连续平滑的起伏轮廓,符合粗糙表面散射研究的理论模型,也可用作相位板。
Abstract
A method of fabricating rough surfaces of known statistical parameters by exposing the photoresist to laser speckle patterns is analysed in this paper. A set of samples have been made successfully. These surfaces have a smoothly modulated profile which is amenable to the theoretical model of rough surface scattering. These specimens can also be used as phase screens.
何毅, 吴健. 制作粗糙度参数可控表面的理论及实验研究[J]. 中国激光, 1997, 24(7): 600. 何毅, 吴健. Theoretical and Experimental Study on Fabricating Rough Surfaces of Known Statistical Parameters[J]. Chinese Journal of Lasers, 1997, 24(7): 600.