强激光与粒子束, 2006, 18 (9): 209, 网络出版: 2007-01-11   

侧照明实验用平面调制微靶的制备及参数测量

Fabrication and measurement of surface perturbation tiny targets in flank illumination experiment
作者单位
1 同济大学波耳固体物理研究所, 上海 200092
2 中国工程物理研究院上海激光等离子体研究所, 上海 201800
摘要
介绍了用于侧照明实验研究瑞利-泰勒流体力学不稳定性(Rayleigh-Taylor instability)实验的聚苯乙烯和铝平面调制微靶的制备工艺.通过图形转移,靶型切割和装配工艺的控制,结合靶参数测量,获得了厚度在几十μm、表面具有波长50 μm和55 μm、振幅从几到几十μm、微靶宽度约为200 μm、剖面正弦调制图形清晰的两种靶型.
Abstract
This paper int roduces fabrication of polystyrene and aluminum surface perturbation targets used for flank illumination Rayleigh2Taylor instability experiment . By figure transfer, incising targets, cont rolling constructional technique and measuring targets’ parameters, we obtained surface perturbation target s with sinusoidal surface perturbation figures with thickness of several tens micrometer, the wavelength about 50 micrometer and amplitude f rom several to several tens micrometer. The width of two kinds of eargets is about 200 micrometer and the profile is clear.

叶君建, 周斌, 徐翔, 何钜华, 沈军, 傅思祖. 侧照明实验用平面调制微靶的制备及参数测量[J]. 强激光与粒子束, 2006, 18(9): 209. Junjian Ye, Bin Zhou, Xiang Xu, Juhua He, Jun Shen, Sizu Fu. Fabrication and measurement of surface perturbation tiny targets in flank illumination experiment[J]. High Power Laser and Particle Beams, 2006, 18(9): 209.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!