强激光与粒子束, 2014, 26 (8): 081001, 网络出版: 2014-07-30   

kW级全光纤激光器理论与实验研究

Theoretical and experimental study on kW all fiber laser
李腾龙 1,2,*孙殷宏 1,2马毅 1,2杨波 1,2
作者单位
1 中国工程物理研究院 高能激光科学与技术重点实验室, 四川 绵阳 621900
2 中国工程物理研究院 应用电子学研究所, 四川 绵阳 621900
摘要
基于主振荡功率放大结构设计了kW级全光纤激光器, 对激光器的功率分布及输出、弯曲选模以及冷却条件下增益光纤的热分布进行了数值模拟分析。搭建了所设计的全光纤激光器, 在注入总泵浦功率1436 W时, 实验获得了1060 W高功率连续激光输出, 光光转换效率73.8%, 光束质量因子小于1.6。初步分析了导致激光器实验输出与理论设计二者偏差的原因。
Abstract
kW-class all-fiber laser was designed by employing master oscillator power amplifier (MOPA) configuration. Power output and distribution, mode controlling by bending, thermal distribution of active fiber in cooling condition were numerically analyzed. The fiber laser based on our design was built up. In the experiment, 1060 W continuous laser was obtained with a total pumped power of 1436 W. The optical-optical conversion efficiency was 73.8% and the beam quality M2 was less than 1.6. We preliminarily discussed the difference between the experimental results and theoretical design.

李腾龙, 孙殷宏, 马毅, 杨波. kW级全光纤激光器理论与实验研究[J]. 强激光与粒子束, 2014, 26(8): 081001. Li Tenglong, Sun Yinhong, Ma Yi, Yang Bo. Theoretical and experimental study on kW all fiber laser[J]. High Power Laser and Particle Beams, 2014, 26(8): 081001.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!