应用光学, 2007, 28 (6): 0793, 网络出版: 2010-06-03  

熔锥型宽带耦合器的研制

Development of fused biconical taper wide band coupler
作者单位
1 中央民族大学 物理与电子工程学院,北京 100081
2 河北建筑工程学院 计算机系,河北 张家口 075024
3 中国人民解放军63713部队,山西 036301
摘要
介绍了全光纤熔融拉锥型3 dB宽带耦合器的理论设计,根据理论设计制作了样品。应用耦合模理论分析了全光纤非对称熔融拉锥型耦合器的宽带特性;提出了3 dB宽带耦合器的制作方案,在此基础上制作了样品;对样品进行测试,样品带宽大约为300 nm(在1300 nm~1600 nm波长之间),附加损耗小于0.5 dB,完全达到了实用化的要求。
Abstract
3 dB wide band coupler is a passive device widely used in optical fiber communication system,optical fiber sensor,optical fiber measurement technology and signal processing system. A fiber fused biconical taper (FBT) 3dB wide band coupler was designed and some samples were manufactured. The bandwidth characteristics of asymmetric FBT coupler were analyzed by coupled-mode equation. The bandwidth of the wide band coupler is about 300 nm(between 1300 nm and 1600 nm),while its excess loss is less than 0.5 dB.

吕敏, 冯志江, 杨笛, 张素娟. 熔锥型宽带耦合器的研制[J]. 应用光学, 2007, 28(6): 0793. Lü Min, FENG Zhi-jiang, YANG Di, ZHANG Su-juan. Development of fused biconical taper wide band coupler[J]. Journal of Applied Optics, 2007, 28(6): 0793.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!