中国激光, 2009, 36 (s1): 26, 网络出版: 2009-06-18  

高功率环形一体化二极管激光抽运模块研究

Researching of High Power Ringed Diode Laser Module
作者单位
中国工程物理研究院应用电子学研究所, 四川 绵阳 621900
摘要
通过对抽运模块增益分布、晶体棒应力以及冷却器等特性分析, 确定了激光器增益分布的均匀性与二极管激光器(DL)的发散角、抽运源与晶体的距离以及抽运源发射波长等参数的关系, 建立了抽运模块聚光腔的设计模型, 利用该理论模型设计并封装出了1~16 kW抽运模块。通过抽运模块性能测试可以得出, 该抽运模块可在占空比20%, 工作电流120 A, 水温25 ℃条件下稳定运行, 增益分布均匀性达到85%, 抽运模块的小信号增益系数为0.148 cm-1。
Abstract
The distribution of optic gain,the stress in Nd∶YAG rod and the speciality of cooler are analyzed in this paper, the relation among the uniformity of optic gain, the distance between diode laser (DL) and center of Nd∶YAG,and the central wavelength of DL is identified. The model of pumping moudle is designed. 1~16 kW DL pumping moudles are packaged and tested. The result of measurement shows that it can work at a duty cycle of 20%. The uniformity of optic gain is 85% with input current of 120 A and 25 ℃ of cooling water temperature the small signal gain is 0.148 cm-1.

高松信, 石勇, 雷军, 魏彬, 武德勇, 唐淳. 高功率环形一体化二极管激光抽运模块研究[J]. 中国激光, 2009, 36(s1): 26. Gao Songxin, Shi Yong, Lei Jun, Wei Bin, Wu Deyong, Tang Chun. Researching of High Power Ringed Diode Laser Module[J]. Chinese Journal of Lasers, 2009, 36(s1): 26.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!