光电技术应用, 2009, 24 (3): 36, 网络出版: 2009-12-30   

基于匹配滤波解调的光纤光栅振动传感器设计

Design of FBG Vibration Sensor Based on Matching Filter Demodulation
作者单位
1 兖矿电铝分公司,山东 邹城 273500
2 兖矿电铝公司电解铝厂,山东 邹城 273500
3 山东大学控制科学与工程学院,山东 济南 250061
摘要
为了弥补现有振动传感器的不足,在分析匹配光栅解调原理的基础上, 设计了一种新型的光纤光栅振动传感器.该传感器采用了梁式结构,可以通过调节梁改变传感光栅的中心波长和传感器的固有频率,既可以实现匹配解调,又扩大了频率测量范围.通过标准信号测试实验,得出该光纤光栅振动传感器具有良好的频率检测性能,频率测量范围为0~200 Hz,在20 Hz、190 Hz检测的波形具有良好的信噪比.
Abstract
Based on the analysis of matched grating demodulation principle, a novel fiber Bragg grating (FBG) vibration sensor was designed. A simply supported beam structure is adopted, so center wavelength of sensing grating and natural frequency of the sensor can be changed by adjusting the beam. The matching demodulation is achieved. At the same time, the range of frequency measurement is expanded. The sensor has good frequency detection performance in standard signal vibration detecting experiments. The frequency scope is up to 200 Hz. In addition, the detected signal has good signal to noise ratio at 20 Hz and 190 Hz.

丁立伟, 赵吉峰, 王静, 隋青美. 基于匹配滤波解调的光纤光栅振动传感器设计[J]. 光电技术应用, 2009, 24(3): 36. DING Li-wei, ZHAO Ji-feng, WANG Jing, SUI Qing-mei. Design of FBG Vibration Sensor Based on Matching Filter Demodulation[J]. Electro-Optic Technology Application, 2009, 24(3): 36.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!