光学与光电技术, 2009, 7 (3): 64, 网络出版: 2009-12-30   

结构光三维成像系统的计算机仿真

Computer Simulation of Measurement System Using Structured Illumination
作者单位
浙江师范大学信息光学研究所, 浙江 金华 321004
摘要
基于相位测量轮廓术和摄像机模型,提出一种结构照明三维成像系统的高精度计算机仿真算法。对于给定的物体三维模型,首先根据系统结构,采用z缓冲技术消除遮挡和阴影部分,得到与摄像机像素点对应的物体表面采样点三维坐标,再使用统一的数学模型和方法处理投影过程。根据摄像机及投影仪的内、外参数,最终得到了摄像机像素点、物体表面采样点和投影仪像素坐标三者之间的对应关系,从而实现了结构照明三维成像系统仿真。为实际系统的结构设计、调整和参数校正提供了参考。
Abstract
A method with high precision is proposed to simulate measurement system using structured illumination. Phase measuring profilometry (PMP) is taken as an example to simulate measurement system. According to the intrinsic and extrinsic parameters of camera, 3D coordinates of sampling points on the object surface are calculated from the corresponding pixels of camera. Z buffering technique is used to eliminate the shadow and occlusion. Uniform model is used to process the projector. The result shows the corresponding relations among camera coordinate, sampling point of object, projector coordinate. Therefore, 3D structured illumination system is simulated.

张海花, 李勇, 许富洋, 金可有. 结构光三维成像系统的计算机仿真[J]. 光学与光电技术, 2009, 7(3): 64. ZHANG Hai-hua, LI Yong, XU Fu-yang, JIN Ke-you. Computer Simulation of Measurement System Using Structured Illumination[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2009, 7(3): 64.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!