以柯达KAI-2093CM CCD图像传感器为例，介绍了行间转移型CCD双路输出的工作模式，对双路输出带来的图像不均匀性问题进行了研究。提出多种影响因素如偏置电压、驱动信号、射极跟随器和AGC增益等，针对这些因素采用硬件电路调整和软件设置协调作用的修正方法，比较了修正前后摄像机系统拍摄出的照片，调整后的照片实现了无缝拼接。

On the basis of Kodaks KAI-2093CM CCD image sensor, the dual output mode of interline CCD is introduced in this paper. When the CCD operates on dual output mode, the nonuniformity of output image will be brought. This problem has been studied. The factors such as bias voltage, the drive signal, emitter follower and the AGC gain are pointed out. The correct method of coordinating hardware circuits adjustment and software setup is used. The images which are grabbed by the camera system are compared, and the effect of adjusting is better.