光学学报, 2010, 30 (2): 321, 网络出版: 2010-02-02   

采用级联相位调制器和强度调制器产生四倍频光载毫米波的光纤无线通信系统

Radio-Over-Fiber System with Frequency Quadruple Optical Millimeter-Wave Generation Utilizing Cascaded Phase Modulator Along with an Intensity Modulator
作者单位
湖南大学 计算机与通信学院微纳光电器件及应用教育部重点实验室,湖南 长沙 410082
摘要
理论和实验研究了基于载波抑制原理采用级联的相位调制器和强度调制器产生四倍频光载毫米波的原理。基于此原理,在中心站利用10 GHz的本振射频信号,通过调节两个调制器的相位差和强度调制器的偏置电压产生40 GHz光载毫米波信号,2.5 Gb/s的基带数据信号直接调制在光载毫米波上,经过20 km标准单模光纤传输至基站。实验研究表明,下行链路信号通过20 km标准单模光纤传输后,传输功率代价小于0.8 dBm,基带信号眼图依然清晰张开,简化了系统配置,信源稳定可靠。
Abstract
We theoretically and experimentally analyzed the principle of frequency quadruple optical millimeter-wave generation utilizing phase modulator along with an intensity modulator based on optical carrier suppression (OCS) scheme. In the experiment,40 GHz optical millimeter wave (mm-wave) is generated by adjusting the bias of intensity modulator and the phase between the two modulators which are driven by 10 GHz radio frequency signal. 2.5 Gb/s baseband data is modulated on 40 GHz optical mm-wave directly and transmitted to the base station over standard single-mode fiber (SMF-28). The experimental results show that the power penalty of downlink data signals which are transmitted over 20 km SMF-28 is less than 0.8 dBm. The eye diagram of the baseband signal is still clear. This scheme simplifies the radio-over-fiber system and mm-wave signals are stable and reliable.

朱传湖, 卢嘉, 董泽, 曹子峥, 陈林, 余建军. 采用级联相位调制器和强度调制器产生四倍频光载毫米波的光纤无线通信系统[J]. 光学学报, 2010, 30(2): 321. Zhu Chuanhu, Lu Jia, Dong Ze, Cao Zizheng, Chen Lin, Yu Jianjun. Radio-Over-Fiber System with Frequency Quadruple Optical Millimeter-Wave Generation Utilizing Cascaded Phase Modulator Along with an Intensity Modulator[J]. Acta Optica Sinica, 2010, 30(2): 321.

本文已被 7 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!