激光技术, 2009, 33 (3): 225, 网络出版: 2010-02-28  

水柱导引抽运光纤激光器端面热效应分析

Thermal effect in pump end of fiber laser with water-jet guided pump
作者单位
清华大学 精密仪器与机械学系 光子与电子技术研究中心 摩擦学国家重点实验室,北京 100084
摘要
为了解决大功率光纤激光器严重的端面热效应问题,采用水柱导引抽运光的抽运新方法。在该抽运形式中,抽运光被耦合进由喷嘴喷出的高速水柱中,水柱以波导形式导引抽运光进入光纤。对普通端面抽运和水柱导引抽运两种抽运形式的双包层光纤激光器的抽运端的热效应进行了理论计算和分析比较,抽运功率为800W时,光纤端面温度从普通端面抽运时的250℃下降到30℃,基本接近环境温度,光纤侧面的温度也大大地降低。结果表明,水柱导引抽运冷却效果显著,特别是光纤的抽运端得到了很好的冷却,可有效地解决大功率光纤激光器的端面热损伤问题。
Abstract
In order to solve the serious thermal effect in high power end-pumped fiber lasers,the water-jet guided pump (WJGP) was proposed.In this pumping scheme,the pumping light is coupled into a high-speed water-jet similar to an optical fiber.The light is guided by the jet and pumped into a following fiber.The thermal effects in the double-clad fiber laser under WJGP and traditional end-pump were analyzed and calculated respectively.With 800W pumping power,the maximum temperature of the pumped end face of fiber declined from 250℃ under traditional end-pump to 30℃ under WJGP,and the temperature of the fiber surface reduced greatly too.It is proved that the cooling effect of WJGP is significant,especially on the fiber’s pumped end and the thermal damage on the pump end in a high power fiber laser can be effectively solved.

黄云火, 黄磊, 张海涛, 柳强, 闫平, 巩马理. 水柱导引抽运光纤激光器端面热效应分析[J]. 激光技术, 2009, 33(3): 225. HUANG Yun-huo, HUANG Lei, ZHANG Hai-tao, LIU Qiang, YAN Ping, GONG Ma-li. Thermal effect in pump end of fiber laser with water-jet guided pump[J]. Laser Technology, 2009, 33(3): 225.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!