光子学报, 2010, 39 (1): 100, 网络出版: 2010-03-11   

聚合物波导微环谐振器的无热化设计

Design of Athermal Polymer Waveguide Microring Resonator
作者单位
1 大连理工大学 物理与光电工程学院
2 光子技术研究中心,辽宁 大连 116024
3 大连理工大学 化工学院 高分子材料系
摘要
从波导微环谐振器的谐振方程出发,推导出了波导微环谐振器的无热化条件和谐振波长温度依赖特性表达式,分析了硅衬底PSQ聚合物波导微环谐振器滤波功能的温度特性.通过选择合适的聚合物衬底来取代传统的硅衬底,可极大地减小聚合物波导微环谐振器的温度敏感性,给出了聚合物衬底选择的方法.研究结果表明,所设计的全聚合物波导微环谐振器,在温度从20~65 ℃范围内谐振波长漂移量最大值为-0.008 5 nm,温度依赖波长漂移率最大值为-0.000 90 nm/K,实现了无热化.
Abstract
According to the resonant equation of waveguide microring resonator,the athermal condition and the temperature-dependence of resonant wavelength are deduced.The temperature-dependent properties of PSQ polymer based waveguide microring resonator are analyzed.By choosing proper polymer substrate to substitute the traditional silicon substrate,the temperature sensitivity of polymer waveguide microring resonator can be suppressed greatly,and the choice method for optimal polymer substrate is given.The results show that the designed all polymer waveguide microring resonator has the maximal resonant wavelength shift of -0.008 5 nm and the maximal wavelength shift slope of -0.000 90 nm·K-1 during the temperature variation from 20 ℃ to 65 ℃,and the athermalization is achieved.

韩秀友, 张佳宁, 金婷婷, 王凌华, 赵明山, 王锦艳, 蹇锡高. 聚合物波导微环谐振器的无热化设计[J]. 光子学报, 2010, 39(1): 100. HAN Xiu-you, Zhang Jia-ning, JIN Ting-ting, WANG Ling-hua, ZHAO Ming-shan, WANG Jin-yan, JIAN Xi-gao. Design of Athermal Polymer Waveguide Microring Resonator[J]. ACTA PHOTONICA SINICA, 2010, 39(1): 100.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!