中国激光, 2010, 37 (3): 617, 网络出版: 2010-03-11   

磷酸钛氧铷高重复率电光调Q特性

Characteristics of RbTiOPO4 Electro-Optic Q-Switch Operation at High Repetition Rate
作者单位
中国科学院 上海光学精密机械研究所 上海市全固态激光器与应用技术重点实验室,上海 201800
摘要
采用连续激光二极管端面抽运的全固态激光器结构,实验研究了新型电光晶体磷酸钛氧铷(RTP)作为Q开关时的电光调Q特性。在重复频率30 kHz,抽运功率24 W时,得到了最大平均输出功率6.7 W,相应脉冲宽度7.8 ns,峰值功率28.6 kW的稳定脉冲序列输出,脉冲能量不稳定度小于5%,斜率效率为34.9%。与同样条件下硅酸镓镧(LGS)电光Q开关的特性进行了比较,发现RTP电光Q开关输出指标优于LGS电光Q开关,并且RTP电光晶体的驱动电压明显低于LGS电光晶体,降低了系统功耗,具备作为三维扫描成像激光雷达发射光源的潜力。
Abstract
The characteristics of RbTiOPO4 (RTP) electro-optic (EO) Q-switch are experimentally studied in an all-solid-state laser which is end-pumped by a continuous-wave laser diode. Stable pulse train is generated at repetition rate of 30 kHz with pump power of 24 W. The maximum average output power is 6.7 W,and the pulse width is 7.8 ns with corresponding peak power of 28.6 kW. The pulse energy fluctuation is less than 5%,and the slope efficiency is 34.9%. It is found that the laser performance is better when using the RTP EO Q-switch in cavity than using La3Ga5SiO14 (LGS) Q-switch. Furthermore,the driving voltage of RTP Q-switch is significantly lower than that of LGS. This high repetition rate,end-pumped all-solid-state laser with an RTP based EO Q-switch can be considered as a candidate for the three-dimensional (3D) imaging lidar transmitter.

冯宇彤, 朱小磊, 唐昊, 孟俊清, 臧华国, 陈卫标. 磷酸钛氧铷高重复率电光调Q特性[J]. 中国激光, 2010, 37(3): 617. Feng Yutong, Zhu Xiaolei, Tang Hao, Meng Junqing, Zang Huaguo, Chen Weibiao. Characteristics of RbTiOPO4 Electro-Optic Q-Switch Operation at High Repetition Rate[J]. Chinese Journal of Lasers, 2010, 37(3): 617.

本文已被 10 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!