光学学报, 2010, 30 (4): 1168, 网络出版: 2010-04-20   

一种基于微机电系统技术的新型波长选择开关

A Novel Wavelength Selective Switch Using Micro-Electro-Mechanical Systems Technology
胡强高 1,2,3,*刘德明 1张玓 2,3袁志林 2,3张博 2,3
作者单位
1 华中科技大学 光电子科学与工程学院,湖北 武汉 430074
2 武汉光迅科技股份有限公司,湖北 武汉 430074
3 新一代光纤通信技术和网络国家重点实验室(筹),湖北 武汉 430074
摘要
波长选择开关(WSS)被认为是最重要的波长引擎技术,已成为运营商在下一代网络部署中的关键器件。提出了一种新型的波长选择开关结构,用基于一维的微电机系统(MEMS)转镜实现切换的功能和透射式MEMS衰减器技术实现无干扰(Hitless)功能,相对于使用二维MEMS转镜同时实现波长切换和Hitless功能的WSS。其具有技术成熟,成本相对低廉等优点。理论分析并数值模拟了该WSS的几个关键参数,实际制作并测试了这种新型的WSS,实现了最大衰减量约34 dB,插入损耗约6.4 dB,通道内色散变化范围为-1.64-6 ps/nm,与数值模拟结果能够较好地吻合。
Abstract
The wavelength selective switch (WSS) is now considered to be the most important wavelength engine technology,and will be the key component of next-generation optical networks for carriers all over the world. A novel WSS is theoretically and experimentally presented in this paper,which implements an one dimensional MEMS mirror to realize the function of wavelength switching,while the Hitless switching is achieved by a MEMS attenuator. Compared with traditional WSS implementing two dimensional MEMS mirror to achieve the two functions simultaneously,this novel WSS is manufactured based on mature technologies,so it is cost-effective and productive. The maximum attenuation of 34 dB,insertion loss of 6.4 dB,dispersion range of -1.64-6 ps/nm are reported,indicating a high uniformity with the simulation results.

胡强高, 刘德明, 张玓, 袁志林, 张博. 一种基于微机电系统技术的新型波长选择开关[J]. 光学学报, 2010, 30(4): 1168. Hu Qianggao, Liu Deming, Zhang Di, Yuan Zhilin, Zhang Bo. A Novel Wavelength Selective Switch Using Micro-Electro-Mechanical Systems Technology[J]. Acta Optica Sinica, 2010, 30(4): 1168.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!