激光技术, 2010, 34 (1): 17, 网络出版: 2010-05-06  

1064nm激光诱导等离子体开关控制355nm脉宽可调输出

Controlling the width-tunable 355nm pulses by means of 1064nm laser-induced plasma shutter
作者单位
1 中国电子科技集团公司 第二十七研究所,郑州 450047
2 中国科学院 上海光学精密机械研究所,上海 201800
摘要
为得到脉宽可控的355nm紫外脉冲激光输出,采用1064nm脉冲激光诱导等离子体开关技术,控制355nm激光脉冲宽度,在激光电离Cu小孔内壁表面及空气击穿共同作用下,获得了2.8ns~10ns的脉宽可调输出。讨论了1064nm单脉冲输出能量对脉宽压缩的影响,在无延时情况下得到了脉宽最短达2.8ns的脉冲激光输出。在此基础上,保持1064nm单脉冲输出能量不变,采用延时装置改变两光路间的光程差,以控制等离子体开关相对于355nm激光脉冲的形成时间,最终得到脉宽可调的脉冲激光输出。结果表明,等离子体开关结构简单、操作方便、适用范围广,是一种较好的脉冲整形手段。
Abstract
In order to obtain the width-tunable 355nm pulses,a 1064nm laser-induced plasma shutter was used to control the pulse width of 355nm pulses.The width tunable from 2.8ns to 10ns was obtained under the interaction of ionization of the Cu pinhole and the atmospheric breakdown.Firstly,the effect of 1064nm pulse energy on pulse compression was discussed,and the shortest output pulse with a width of 2.8ns was obtained without delay time between two laser paths.Subsequently,adopting the device for delay-time to vary the optical differences between two paths,the width-tunable 355nm laser pulses were obtained.Experimental results indicate that laser-induced plasma shutter is a better pulse-shaping means with simple configuration,convenient operation,and widespread applications.

张芳沛, 楼祺洪, 李红霞, 韩文杰, 邢宇华, 董景星, 沈严, 薛海中. 1064nm激光诱导等离子体开关控制355nm脉宽可调输出[J]. 激光技术, 2010, 34(1): 17. ZHANG Fang-pei, LOU Qi-hong, LI Hong-xia, HAN Wen-jie, XING Yu-hua, DONG Jing-xing, SHEN Yan, XUE Hai-zhong. Controlling the width-tunable 355nm pulses by means of 1064nm laser-induced plasma shutter[J]. Laser Technology, 2010, 34(1): 17.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!