应用光学, 2009, 30 (1): 16, 网络出版: 2010-05-31   

二维空间紫外LED阵列实现单光斑辐照固化系统的设计

Design a single spot UV-curing system with two-dimensional UV-LED array
芦永军 1,2,*许文海 1,2赵欢 1,2曲艳玲 1,2宋敏 1,2
作者单位
1 大连民族学院光电子技术研究所,辽宁大连 116600
2 大连海事大学,辽宁大连 116026
摘要
新型大功率紫外LED具有电光转化效率高、光谱纯度高和体积小等优点,但单管LED功率仍很难满足光固化的要求,针对单光斑辐照要求,提出采用空间阵列UV-LED排布实现能量累加的方案。该方案通过单管LED聚光系统与集成阵列系统综合设计实现了各单元单光斑辐照度在辐照面上的合成,最终得到的光斑辐照度分布均匀、尺寸合理,阵列系统后工作距离长,完全满足现场应用的具体指标要求。通过外围电子线路控制阵列LED的电流强度及通断状态可实现光斑辐照度在(1000~1800) mW/cm2可调,光斑尺寸为1cm2,后工作距离为10cm。
Abstract
Since the single LED can not meet the demand of UV-curing, a new solution in which the accumulation of UV radiative energy was implemented by two-dimensional LED array is proposed to utilize the advantages of the latest high-power UV-LED, such as high electro-optical conversion efficiency, high spectral purity and small volume. The irradiance combination of each single spot on the irradiated surface was realized by the combinated design of single LED focusing system and the integrated array system. The obtained spot has the merits of uniform irradiance distribution, reasonable size and long back operation distance. The spot irradiance adjustable in the range of 1000-1 800 mW/cm2 is achieved by controlling the current and on-off state of LED array with peripheral electronics. The size of the obtained spot is 1 cm2and the back operation distance is 10cm.

芦永军, 许文海, 赵欢, 曲艳玲, 宋敏. 二维空间紫外LED阵列实现单光斑辐照固化系统的设计[J]. 应用光学, 2009, 30(1): 16. LU Yong-jun, XU Wen-hai, ZHAO Huan, QU Yan-ling, SONG Min. Design a single spot UV-curing system with two-dimensional UV-LED array[J]. Journal of Applied Optics, 2009, 30(1): 16.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!