激光技术, 2008, 32 (4): 0410, 网络出版: 2010-06-03   

选区激光熔化快速成型过程温度场数值模拟

Simulation of the temperature field in rapid prototyping of selective laser melting
作者单位
1 华南理工大学 机械工程学院,广州 510640
2 广东海洋大学 理学院,湛江 524088
摘要
为了优化铜磷合金粉末选区激光熔化快速成型的工艺参量,采用有限元分析软件ANSYS对其温度场进行了模拟,经理论分析和实验验证,获得了其温度场分布的数据。对材料未知温度范围内的热特性参量用插值法近似获得,采用不等网格剖分方式,用热焓去处理相变潜热问题。结果表明,其温度场的等温线分布为椭圆形,用模拟遴选的工艺参量(在铺粉厚度为0.22mm时,选用激光功率为100W、扫描速度为0.25m/s和激光束半径为0.1mm)能实现选区激光熔化快速成型。这一结果对其它粉末材料的选区激光熔化快速成型也是有帮助的。
Abstract
In order to implement rapid prototyping of Cu-P alloy powder based on selective laser melting,the temperature field was simulated by the finite element analysis software——ANSYS before fabrication so that its distribution could be obtained.During the process of simulation,the thermal physical parameters of material at certain temperature were obtained through interpolation method,an unequal meshing method was adopted and the thermal enthalpy could be used to replace the latent heat of fusion. It shows that the temperature field distribution likes an ellipse and the parameters selected by simulation(a laser power of 1OOW,a scanning speed of 0.25m/s and a beam spot radius of 0.l mm were selected when the layer thickness was 0.22mm)can be used in selective laser melting.

师文庆, 杨永强, 黄延禄, 程大伟. 选区激光熔化快速成型过程温度场数值模拟[J]. 激光技术, 2008, 32(4): 0410. SHI Wen-qing, YANG Yong-qiang, HUANG Yan-lu, CHENG Da-wei. Simulation of the temperature field in rapid prototyping of selective laser melting[J]. Laser Technology, 2008, 32(4): 0410.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!