应用光学, 2006, 27 (4): 0315, 网络出版: 2010-06-03   

端面泵浦掺Yb3+双包层光纤激光器

End-pumped Yb3+ doped double clad fiber laser
作者单位
1 电子科技大学 通信与信息工程学院光纤重点实验室,成都 610054
2 中国工程物理研究院激光聚变研究中心,四川 绵阳 621900
3 中国工程物理研究院 应用电子学研究所,四川 绵阳 621900
摘要
从双包层光纤激光器的速率方程出发,得到了光纤中泵浦光与激光的功率分布、输出功率与泵浦功率的关系、腔镜反射率及光纤长度对输出功率的影响。研究结果表明:输出激光功率与光纤长度及后腔镜反射率有很强的依赖关系,存在一个输出功率最大的最佳光纤长度。后腔镜反射率越大,输出激光功率越小;当光纤长度较短时,在输出端放置反射镜使泵浦光高反射,可以提高输出功率和效率。通过对端面泵浦掺Yb3+双包层光纤激光器进行理论分析和实验研究,得到输出激光的中心波长为1088.3nm,斜率效率为33.7%,最大输出功率为1.75W。
Abstract
Theoretical analysis and experiment of end-pumped Yb3+doped double-clad fiber laser are presented in this paper. Based on rate equations,the distribution of pump power and laser power in the fiber,the effect of fiber length and reflectivity of cavity minor on output power are studied. The maximum output laser power can be obtained with the optimum fiber length and fiber end as output coupling. That is,the higher the reflectivity of rear-cavity mirror is,the lower the laser output power will be. For short fiber,the output laser power and slope efficiency can be improved when a reflective mirror is set at output end to reflect the pump light. In the experiment,the laser with a central wavelength of 1 088.3 nm,the slope efficiency of 33.7 % and the maximal output power of 1.75 W were obtained.

陈吉欣, 隋展, 陈福深, 王凤蕊, 李明中, 王建军, 刘志强, 罗亦鸣. 端面泵浦掺Yb3+双包层光纤激光器[J]. 应用光学, 2006, 27(4): 0315. CHEN Ji-xin, SUI Zhan, CHEN Fu-shen, WANG Feng-rui, LI Ming-zhong, WANG Jian-jun, LIU Zhi-qiang, LUO Yi-ming. End-pumped Yb3+ doped double clad fiber laser[J]. Journal of Applied Optics, 2006, 27(4): 0315.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!