电光与控制, 2010, 17 (6): 85, 网络出版: 2010-07-05  

JTAG测试中扫描链的配置问题研究

Configuration of Boundary Scan Chain Based on JTAG Test
作者单位
1 海军驻洛阳地区航空军代表室, 河南 洛阳 471009
2 中航工业洛阳电光设备研究所, 河南 洛阳 471009
摘要
分析了常见扫描链路配置中面临的问题,提出了一种扫描链配置方案。结合工程测试中出现的实际问题,给出了有关扫描链路配置的一些建议和注意事项。
Abstract
The common problems in configuration of boundary scan chain are analyzed. Then a new configuration scheme of board level dynamic boundary scan chain is proposed. Some feasible suggestions and corrective measures are given based on summary to the practical problems in engineering test.

张磊, 于晓辉, 刘冲. JTAG测试中扫描链的配置问题研究[J]. 电光与控制, 2010, 17(6): 85. ZHANG Lei, YU Xiaohui, LIU Chong. Configuration of Boundary Scan Chain Based on JTAG Test[J]. Electronics Optics & Control, 2010, 17(6): 85.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!