首页 > 论文 > 应用激光 > 30卷 > 3期(pp:178-182)

激光冲击诱导残余应力预测方法研究

A Study on the Prediction Method of the Residual Stress Induced by Laser Shock Processing

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

研究基于激光冲击诱导残余应力产生原理,把激光冲击诱导的最终稳定的残余应力看成激光冲击引起的残余应力与为满足平衡而产生的残余应力的代数和,提出了残余应力预测方法。通过激光冲击平板件的残余应力预测发现,模拟结果与实验结果十分接近。说明此方法可实现对工件全尺寸的残余应力预测,为后续的分析提供了条件。另外,对激光冲击处理圆角试样产生的残余应力进行了模拟研究,发现工件的形状对最终稳定的残余应力的分布存在影响,表现为表面应力值和残余压应力的深度发生了变化。说明此方法可能实现激光冲击处理任意形状工件的残余应力预测。

Abstract

Based on the mechanism of the formation of residual stress generated by laser shock processing (LSP) that the stabilized residual stress is deemed as the superposition of the LSP induced residual stress and the residual stress required to satisfy equilibrium, a methodology was developed to bridge the gap between the simulation of residual stress and the analysis of residual stress. A simple verification was made by comparing the predicted and experimental results in a flat plate, and it shows a good agreement between them. This method was also supposed to predict the residual stress resulting in an arbitrary body treated with arbitrary LSP parameters. Residual stress prediction in a corner fillet specimen is presented, and the result shows that residual stress is affected by the shape of the specimen, both the surface stress and the depth of residual compress stress.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TN249;TG178

基金项目:国家自然科学基金资助项目(项目编号:50451004)

收稿日期:2010-01-27

修改稿日期:--

网络出版日期:0001-01-01

作者单位    点击查看

花银群:江苏大学材料科学与工程学院,江苏 镇江 212013北京航空航天大学化学与环境学院,北京 100083
姜辉:江苏大学机械工程学院,江苏 镇江 212013
陈瑞芳:江苏大学机械工程学院,江苏 镇江 212013
蔡峥嵘:江苏大学机械工程学院,江苏 镇江 212013
陈玉晓:江苏大学机械工程学院,江苏 镇江 212013

备注:花银群(1963),男,江苏东台人,教授,博士生导师,博士,主要从事激光表面加工技术、微纳米制备技术方面的研究。

【1】Clauer A H,Lahrman D F.Laser shock processing as a surface enhancement process[J].Key Engineering Materials,2001,197:121-144.

【2】Yongxiang Hu,Zhenqiang Yao,Jun Hu.3-D FEM simulation of laser shock processing[J].Surface & Coatings Technology,2006,201:1426-1435.

【3】Abul Fazal M. Arif.Numerical prediction of plastic deformation and residual stresses induced by laser shock processing[J].Journal of Materials Processing Technology,2003,136:120-138.

【4】Kan Ding,Lin Ye.Simulation of multiple laser shock peening of a 35CD4 steel alloy[J].Journal of Materials Processing Technology,2006,178:162-169.

【5】曾春华,邹十践编译.疲劳分析方法及应用[M].北京:国防出版社,1987.

【6】肖爱民,杨继昌,张永康.激光冲击强化原理及应用概述[J].电加工与模具,2000,6:7-9 .

【7】Chunhui Yang,Peter Damian Hodgson,Qianchu Liu,et al.Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening[J].Journal of Materials Processing Technology,2008,201:303-309.

【8】Harold Luong,Michael R. Hill.The effects of laser peening on high-cycle fatigue in 7085-T7651 aluminum alloy[J].Materials Science and Engineering,2008,A 477:208-216.

【9】郭乃国,罗新民,花银群.激光冲击处理对金属微结构及其性能的影响[J].材料导报,2006,20(6):10-13.

【10】张红兵,杜建红.有限元模型中螺栓载荷施加方法的研究[J].机械设计与制造,1999,6:32-33.

【11】张方瑞主编.ANSYS 8.0应用基础与实例教程[M].北京:电子工业出版社,2006.

【12】潘复生,张丁非.铝合金及应用[M].北京:化学工业出版社,2006.

引用该论文

Hua Yinqun,Jiang Hui,Chen Ruifang,Cai Zhengrong,Chen Yuxiao. A Study on the Prediction Method of the Residual Stress Induced by Laser Shock Processing[J]. APPLIED LASER, 2010, 30(3): 178-182

花银群,姜辉,陈瑞芳,蔡峥嵘,陈玉晓. 激光冲击诱导残余应力预测方法研究[J]. 应用激光, 2010, 30(3): 178-182

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF