光电工程, 2010, 37 (7): 126, 网络出版: 2010-09-07   

导电聚合物有序超薄膜材料特性的分析

Analysis of Material Characteristic of Ordered Conducting Polymer Ultrathin Film
作者单位
电子科技大学 光电信息学院,电子薄膜与集成器件国家重点实验室,成都 610054
摘要
首次采用LB 膜诱导沉积法制备PEDOT 高度有序导电聚合物薄膜,所采用的工艺是将十八胺(ODA)与聚3,4-乙烯二氧噻吩/聚苯乙烯磺酸(PEDOT-PSS)先形成ODA 包裹PEDOT-PSS 纳米粒子的组装体,然后再将其铺展于气/液界面,制备PEDOT-PSS 复合LB 膜。研究了复合单分子膜在气/液界面的成膜性能,对不同层数的LB 膜进行了较为详细的微观分析和结构表征。采用UV-Vis 光谱对不同层数的复合膜进行了表征, 发现ODA-SA/PEDOT-PSS 膜具有比ODA/PEDOT-PSS 膜好得多的成膜性,这是由于生成的氨基酸改善了复合膜的成膜性;FT-IR 和XPS 分析表明固态复合膜中存在静电作用力,复合膜靠静电力在气/液界面进行组装。实验表明,PEDOT-PSS 纳米粒子对单分子层具有包裹作用,形成了稳定的复合单分子膜;在十八胺(ODA)和硬脂酸(SA)摩尔比2:1、亚相温度23℃、PEDOT-PSS 浓度1×10-3 mol/L、压缩速率5 mm/min、拉膜速率为1 mm/min 的条件下薄膜具有较好的成膜性能。
Abstract
A Langmuir-Blodgett (LB) inducing method was firstly used to prepare single layer and multilayer conducting composite PEDOT-PSS film. The film-forming ability of ionization ODA and ODA-SA monolayer spread on PEDOT-PSS nanoparticles subphase and the behavior of ODA/PEDOT-PSS assembly particles on pure water were firstly investigated. The results indicate that nanoparaticles in suphase pack the ionization monolayer and stable complex Langmuir film was formed at air/water interface. It has been found that the best film-forming conditions for composite film were as follows: molar ration of ODA to SA was 2:1, suphase temperature was 23 centigrade, concentration of PEDOT-PSS in subphse was about 1×10-3 M, and compressing speed and deposition speed were 5 mm/min and 1 mm/min respectively. The SIMS and XRR investigation show that this film exhibits well ordered layer structure.

郑华靖, 徐建华, 蒋亚东, 杨亚杰. 导电聚合物有序超薄膜材料特性的分析[J]. 光电工程, 2010, 37(7): 126. ZHENG Hua-jing, XU Jian-hua, JIANG Ya-dong, YANG Ya-jie. Analysis of Material Characteristic of Ordered Conducting Polymer Ultrathin Film[J]. Opto-Electronic Engineering, 2010, 37(7): 126.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!