中国激光, 2010, 37 (12): 3133, 网络出版: 2014-03-12   

金属介质组合270°反射式宽带相位延迟膜设计

Metal-Dielectric Multilayer Coating Design Achieving Broadband and High-Reflectance and 270° Phase Retardation
作者单位
1 中国科学院上海光学精密机械研究所光学薄膜技术中心, 上海 201800
2 中国科学院研究生院, 北京 100049
摘要
对激光实现由线偏振光转变成圆偏振光的偏振态调制,需要引入90°或270°相位延迟器。设计中选择金属介质组合,光学性能优良的Ag膜作为金属层,利用Gires-Tournois (G-T)腔调节相位,通过优化介质膜堆,在45°入射角和1000~1100 nm波段,所得相位延迟为270°±1°。通过误差分析可知,在现有膜厚控制精度下,控制敏感层容差,在设计带宽内可得到反射率R≥99.9%和相位延迟偏差δ<7.2°。
Abstract
90° or 270° phase retarder is introduced to change the polarization of light from linear to circular. The combination of metal and dielectric is used in this design. The silver thin film with excellent optical quality is used as the metal layer. 270°±1°phase shift between p- and s-polarization component as well as broadband high reflection mutilayer coatings is designed by optimizing dielectric layers in the wavelength range 1000 ~ 1100 nm at 45°. The errors produced in manufacturing and using process are also analysed. Under the manufacturing precision nowadays, more attention ought to be paid to ensure that the phase shift error δ<7.2°and reflectivity over 99.9% are achieved in the 1000~1100 nm spectral region for use at 45°。

李星, 黄建兵, 魏朝阳, 王胭脂. 金属介质组合270°反射式宽带相位延迟膜设计[J]. 中国激光, 2010, 37(12): 3133. Li Xing, Huang Jianbing, Wei Chaoyang, Wang Yanzhi. Metal-Dielectric Multilayer Coating Design Achieving Broadband and High-Reflectance and 270° Phase Retardation[J]. Chinese Journal of Lasers, 2010, 37(12): 3133.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!