首页 > 论文 > 应用光学 > 31卷 > 6期(pp:950-955)

点阵列标定模板图像特征点提取方法

Feature point extraction of spot array calibration target

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

在摄像机标定过程中,提取标定模板图像特征点的精度是影响摄像机内外参数标定精度的重要因素。本文根据条纹投影三维轮廓测量实验系统的要求制作了点阵列标定模板,在图像处理边缘理论的基础上,以圆的解析特性为依据,采用坐标转换思想,引进圆系描述点、圆对应关系,运用统计学理论,提出提取点阵列标定模板图像特征点的新方法,并通过实验验证了该方法的正确性和可行性。为下一步的摄像机内外参数求解做了铺垫。

Abstract

The feature point extraction of calibration target during the camera calibration is crucial and may affect the precision of camera internal and external parameters. Based on several typical camera calibration targets, a spot array target is designed as required by the fringe projection 3D profile measurement system. According to the image edge processing theory, a new method for feature point extraction of the spot array target is introduced, which includes the analytical characteristic theory of circle, the coordinate transformation, the corresponding relation of spot and circle, and statistical theory. The validity of this method is verified by experiment. This work can be used to solve camera internal and external parameters.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TN911.73;TP391.41

基金项目:西安市科技局CXY1013-2

收稿日期:2010-06-25

修改稿日期:2010-07-28

网络出版日期:0001-01-01

作者单位    点击查看

马少平:西安工业大学陕西省薄膜技术与光学检测重点实验室, 陕西 西安 710032
田爱玲:西安工业大学陕西省薄膜技术与光学检测重点实验室, 陕西 西安 710032
刘丙才:西安工业大学陕西省薄膜技术与光学检测重点实验室, 陕西 西安 710032
王红军:西安工业大学陕西省薄膜技术与光学检测重点实验室, 陕西 西安 710032

联系人作者:马少平(shaopingma2010@hotmail.com)

备注:马少平(1984-),男,陕西宝鸡人,西安工业大学光电工程学院硕士研究生,主要从事光学检测和图像处理研究。

【1】郑南宁.计算机视觉与模式识别[M].北京:国防工业出版社,1998:130-165.
ZHENG Nan-ning. Computer vision and model recognition[M]. Beijing: National Defense Industry Press, 1998:130-165. (in Chinese)

【2】ZHANG Zheng-you. A flexible new technique for camera calibration[M]. Washington WA, Micro-soft Research Microsoft Corporation, Technical Report MSR-TR-98-71, 1998.

【3】MENG Xiao-qiao,LI Hua,HU Zhan-yi.A new easy camera calibration technique based on circular points[J].Pattern Recognition, 2003,36(5):1155-1164.

【4】张广军.机器视觉[M].北京:科学出版社,2005:33-63.
ZHANG Guang-jun, Machine vision[M]. Beijing: Science Press 2005:33-63. (in Chinese)

【5】TIAN Ai-ling, JIANG Zhuang-de, HUANG Yan-qun. A flexible new three-dimensional measurement technique by projected fringe pattern[J]. Optics & Laser Technology 2006,38,585-589.

【6】田爱玲, 刘洋, 郭迎福, 等. 双CCD光栅投影法测量物体三维轮廓技术[J]. 西安工业大学学报, 2009,29(2):108-112.
TIAN Ai-ling, LIU Yang, GUO Ying-fu, et al. Technology of Double CCD 3D Profile Measurement using Grating Project[J].Journal of Xi’an Technological Unversity, 2009,29(2):108-112.(in Chinese with an English abstract)

【7】黄燕群,田爱玲.光栅投影三角形法测量物体的三维轮廓[J].西安工业学院学报,2004,24(2):103-106.
HUANG Yan-qun, TIAN Ai-ling, 3D Profile Measurement using Grating Projection with Triangle Method[J].Journal of Xi’an Institute of Technology, 2004,24(2):103-106.(in Chinese with an English abstract)

【8】QIU Mao-lin,MA Song-de.The nonparametric app-roach for camera calibration[J].Fifth International Conference on Computer Vision (ICCV’95),1995:224-229.

【9】北京天远三维科技有限公司.天远三维扫描仪OKIO-400使用说明书[EB/OL].[2009-10-07].http://www.3dscan.com.cn/cpjs.asp?class=21.
Bejing Tian Yuan 3D Technology Co.,LTD. Tianyuan 3D scanning instrument operating instruction manual for OKIO-400[EB/OL].[2009-10-07].http://www.3dscan.com.cn/cpjs.asp?class=21.

【10】李红梅,黄梦涛,田爱玲,等.亚像素级标定角点提取新算法[J].西安科技大学学报,2008,26(4):536-540.
LI Hong-mei, HUANG Meng-tao, TIAN Ai-ling, et al. A new algorithm of subpixel corner detection[J]. Journal of Xi’an University of Science and Technology, 2008,26(4):536-540. (in Chinese with an English abstract)

【11】Pa¨r Kierkegaard. A method for detection of circular arcs based on the Hough transform[J]. Machine Vision and Applications, 1992,5:249-263.

引用该论文

MA Shao-ping,TIAN Ai-ling,LIU Bing-cai,WANG Hong-jun. Feature point extraction of spot array calibration target[J]. Journal of Applied Optics, 2010, 31(6): 950-955

马少平,田爱玲,刘丙才,王红军. 点阵列标定模板图像特征点提取方法[J]. 应用光学, 2010, 31(6): 950-955

被引情况

【1】范小虎,朱目成,聂诗良. 发动机叶尖间隙影像测量系统的设计. 应用光学, 2012, 33(4): 743-746

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF