首页 > 论文 > 中国光学 > 4卷 > 1期(pp:66-71)

高功率准分子激光主振荡功率放大系统光学元件的稳定性

Optical element stability of high power excimer laser MOPA system

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

为了分析高功率准分子激光主振荡功率放大(MOPA)系统中各光学元件稳定性对靶面光斑定位精度的影响,建立了分析模型,利用分析结果指导高稳定性镜架设计以满足系统实验需求。根据高功率准分子激光MOPA系统特点,有效地简化了系统光路,建立了系统光路模型; 按照系统打靶精度要求,利用三维坐标变换和光线追迹法,计算得到了系统单个光学元件稳定性对靶面光斑定位精度的影响规律; 最后,对自行设计的镜架进行了稳定性测量。计算结果表明,反射镜的旋转变化和透镜垂直光轴的平移变化是影响靶面光斑定位精度的主要因素,且主放大光路中反射镜在X方向和Y方向上最大的变化范围分别不能超过0.8和1.6 μrad。实际测量结果表明,设计的镜架在X方向和Y方向最大的变化范围分别为0.6和0.81 μrad,满足系统实验要求。

Abstract

In order to analyze the impacts of stability of optical elements on the target positioning in a high power excimer laser Master Oscillator Power Amplification(MOPA) system, an analyzing model for the system was established and a mirror mount was also designed according to the analyzing results to meet the need for the system experiment. Firstly, in light of the unique feature of high power excimer laser MOPA system, the beam path was effectively simplified, and a three dimensional layout model to analyze the system was established. Then, in terms of the model and the requirements of target positioning precision of the system, the stability request of every optical element in this system was obtained by using the three dimensional coordinate conversion and ray-tracing. Finally, the stability parameters of the mirror mount designed by ourselves were measured. The simulating results indicate that the rotations of mirrors and the drift of lens vertical to the optical axis are the chief factors affecting the target positioning precision. In addition, the rotations of mirrors in the main amplifiers round X and Y axes should be controlled less than 0.8 and 1.6 μrad, respectively. The experimental results for the mirror mount designed point out that the rotations round X and Y axes are not more than 0.6 and 0.81 μrad, respectively, which means that the tolerance of coordinate parameters of each optical element corresponding to the target positioning precision satisfies the requirement of the system.

投稿润色
补充资料

中图分类号:TN248.2

所属栏目:激光技术

基金项目:激光与物质相互作用国家重点实验室基金资助项目(No.SKL110904)

收稿日期:2010-08-16

修改稿日期:2010-10-24

网络出版日期:0001-01-01

作者单位    点击查看

沈炎龙:西北核技术研究所,激光与物质相互作用国家重点实验室,陕西 西安 710024
黄珂:西北核技术研究所,激光与物质相互作用国家重点实验室,陕西 西安 710024
马连英:西北核技术研究所,激光与物质相互作用国家重点实验室,陕西 西安 710024
郑国鑫:西北核技术研究所,激光与物质相互作用国家重点实验室,陕西 西安 710024
王大辉:西北核技术研究所,激光与物质相互作用国家重点实验室,陕西 西安 710024

联系人作者:沈炎龙(yanlong@mail.ustc.edu.cn)

备注:沈炎龙(1983—),男,湖南岳阳人,硕士,研究实习员,主要从事高功率激光技术及应用方面的研究。

【1】ROSOCHA L A,HANLON J A,MCLEOD J,et al.. Aurora multi-kilo-joule KrF laser system prototype for inertial confinement fusion[J]. Fusion Technol.,1987,11: 497-531.

【2】LIU J R,ZHAO X Q,YI A P,et al.. Experimental study on a long-pulse excimer laser system[J]. SPIE,2005,5627: 242-246.

【3】赵学庆,薛全喜,郑国鑫,等.准分子激光前端光束形态控制技术研究[J].中国工程科学,2009,11(8): 52-57.
ZHAO X Q,XUE Q X,ZHENG G X,et al.. The shape control over the front-end of excimer laser beam[J]. Eng. Sci.,2009,11(8): 52-57.(in Chinese)

【4】刘晶儒.准分子激光技术及应用[M].1版.北京:国防工业出版社,2009: 140-149.
LIU J R. Excimer laser Technology and Applications[M]. 1st ed. Beijing: National Defense Industry Press,2009: 140-149.(in Chinese)

【5】傅学农,陈晓娟,吴文凯,等.大口径反射镜组件设计及稳定性研究[J].光学 精密工程,2008,16(2): 179-183.
FU X N ,CHEN X J ,WU W K,et al.. Design of large aperture mirror support and its stability[J]. Opt. Precision Eng.,2008,16(2): 179-183.(in Chinese)

【6】HAMMER D,DYSON F,FORTSON N. Inertial Confinement Fusion(ICF) Review,JSR-96-300[R]. Washington: USDOE Office of Energy Research,1996.

【7】TRUMMER D J,FOLEY R J,SHAW G S. Stability of optical elements in the NIF target area building[C]. 3rd Annual International Conference on Solid State Lasers for Application to Inertial Confinement Fusion,Monlergy,CA,June 7-12,1998.

【8】师智全,彭翰生,粟敬钦.ICF 驱动器光束定位误差估计[J].强激光与粒子束,2002,14(2): 275-278.
SHI ZH Q,PENG H SH,SU J Q. Beam positioning error budget in ICF driver[J]. High Power Laser and Particle Beams,2002,14(2): 275-278.(in Chinese)

【9】师智全,魏晓峰,马驰,等.大型固体激光器光束定位稳定性分析[J].强激光与粒子束,2000,12(s1): 167-170.
SH I ZH Q,WEI X F,MA CH,et al.. Beam pos it ion stability analysis in the large solid state laser system[J]. High Power Laser and Particle Beams,2000,12(s1): 167-170.(in Chinese)

【10】朱启华,张小民,景峰.多程放大系统总体光路的稳定性研究[J].强激光与粒子束,1999,11(6): 653-657.
ZHU Q H,ZHANG X M,JING F,et al.. Study of the layout stability of multi-pass amplification system[J]. High Power Laser and Particle Beams,1999,11(6): 653-657.(in Chinese)

【11】冯斌,周忆,张军伟,等. 大型精密镜架地面随机微振动响应分析[J]. 光学 精密工程,2007,15(3):356-361.
FENG B,ZHOU Y,ZHANG J W. Analysis on ground random vibration response of large-scale precision mirror mount[J]. Opt. Precision Eng.,2007,15(3): 356-361.(in Chinese)

【12】谢娜,周海,张军伟,等. 大型激光装置光学元件的稳定性设计[J]. 光学 精密工程,2009,17(10): 2411-2417.
XIE N,ZHOU H,ZHANG J W,et al.. Stability of optical elements in large laser facilities[J]. Opt. Precision Eng.,2009,17(10): 2411-2417.(in Chinese)

引用该论文

SHEN Yan-long,HUANG Ke,MA Lian-ying,ZHENG Guo-xin,WANG Da-hui. Optical element stability of high power excimer laser MOPA system[J]. Chinese Optics, 2011, 4(1): 66-71

沈炎龙,黄珂,马连英,郑国鑫,王大辉. 高功率准分子激光主振荡功率放大系统光学元件的稳定性[J]. 中国光学, 2011, 4(1): 66-71

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF