光电技术应用, 2011, 26 (1): 44, 网络出版: 2011-04-08  

利用等效电容计算复合材料的有效介电常数

Algorithm for Effective Permittivity of Composite Materials Using Equivalent Capacitance
作者单位
解放军理工大学, 江苏 南京 210007
摘要
为克服经典理论不适合计算高占空比复合材料的情况,提出了一种利用等效电容计算复合材料的有效介电常数的方法。对于颗粒弥散型复合材料,将其看成是电容器内的填充介质。通过求解电容器的等效电容,进一步导出复合材料有效介电常数的计算公式。将此模型与MG模型以及EMA模型对比,其计算结果非常接近,表明这种方法原理正确、适应性强,并且在高占空比的时候与文献给出的实验值吻合得更好。
Abstract
Classic theory is not suitable for the calculation of composite materials with high duty factor, an algorithm of the effective permittivity of composite materials using the equivalent capacitance is presented. The packing mediums in the capacitor are the particle dispersion type composite materials. By solving the equivalent capacitance of the capacitor, the formulas of effective permittivity are derived. By comparing the model with MG model and EMA model, the results are very similar, so this algorithm is correct and adaptable,the results are matched with the experimental values given in the literatures under the case of high duty factor.

唐厚超, 吕绪良, 吴超, 贾其. 利用等效电容计算复合材料的有效介电常数[J]. 光电技术应用, 2011, 26(1): 44. TANG Hou-chao, LV Xu-liang, WU Chao, JIA Qi. Algorithm for Effective Permittivity of Composite Materials Using Equivalent Capacitance[J]. Electro-Optic Technology Application, 2011, 26(1): 44.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!