应用光学, 2011, 32 (1): 40, 网络出版: 2011-04-28  

圆柱筒式脉冲光源辐射均匀性的模拟

Simulation of irradiation uniformity of a cylindrical pulse source
作者单位
西北核技术研究所, 陕西 西安 710024
摘要
圆柱筒式脉冲均匀光源在各种光学标定中有广泛应用。应用Monte-Carlo方法对光子进行跟踪模拟,通过变权重法和固定权重法两种算法得到出光面接收的相对光照度。当内壁反射类型、光源的位置、圆柱筒的高度与直径比不同时,出光面形成的光照度均匀性不同。通过模拟结果可知,当内壁为漫反射时,圆柱筒长度与直径比越大,出光面的光照度越均匀; 但当比值大于3/2时,均匀性已无明显变化。最终得到满足标定实验要求的圆柱筒的最佳结构。
Abstract
The uniform cylindrical pulse source is often used as calibration source. Based on Monte Carlo techniques, the distribution of the irradiance at the output plane of the cylinder is simulated by variable weight method and fixed weight method. The distribution of the light is affected by the type of reflection, the position of the light source, and the shape of the cylinder. Simulation and experiment results show that, when light source located at the center of the cylinder with an aspect ratio of 3/2 (length to diameter), and was diffused by the cylinder inner surface in transmission, the required uniformity was achieved.

宋岩, 宋顾周, 张占宏, 马继明, 韩长材. 圆柱筒式脉冲光源辐射均匀性的模拟[J]. 应用光学, 2011, 32(1): 40. SONG Yan, SONG Gu-zhou, ZHANG Zhan-hong, MA Ji-ming, HAN Chang-cai. Simulation of irradiation uniformity of a cylindrical pulse source[J]. Journal of Applied Optics, 2011, 32(1): 40.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!