光电工程, 2011, 38 (5): 35, 网络出版: 2011-05-13  

用于纳米光刻的超分辨缩小成像平板超透镜研究

Planar Hyper Lens with Demagnification for Nanolithography
作者单位
1 中国科学院光电技术研究所 微细加工光学技术国家重点实验室,成都 610209
2 中国科学院研究生院,北京 100049
摘要
本文提出和研究了利用超分辨缩小成像平板超透镜,在i 线光源波长下实现纳米尺度光刻方法。为了在超分辨透镜像面位置获得高质量的光刻图形,采用超分辨透镜-光刻胶-反射银膜的结构方式,解决由于超透镜磁场偏振传输模式带来的成像光场畸变问题,大大提高了成像质量和光场对比度。采用掩模图形结构预补偿的方法,消除超分辨透镜的倍率畸变像差影响。基于有限元电磁计算方法,数值模拟结果验证了该方法在i 线光源波长下实现纳米尺度缩小成像光刻的可能性。在i 线(365 nm)光源波长下,得到约35 nm 线宽的高对比成像光场模拟结果,并分析了结构参数变化对成像光场带来的影响。
Abstract
Nanolithography using hyperlens in planar form and i-line mercury lamp is presented. To obtain patterns with high quality at the imaging plane of hyperlens, lens-photoresist-silver layer structure is employed to avoid the blurring of electric field intensity distribution delivered by the transversal magnetic polarization features of hyperlens. Moreover,the specific design of mask is employed for compensating aberration of magnification non-uniformity of hyperlens.Numerical simulations demonstrate the ability of nanolithography by this method. About 35nm line width with high contrast is obtained in the light distribution and the geometrical parameters influence is also discussed.

李恒一, 王长涛, 罗先刚. 用于纳米光刻的超分辨缩小成像平板超透镜研究[J]. 光电工程, 2011, 38(5): 35. LI Heng-yi, WANG Chang-tao, LUO Xian-gang. Planar Hyper Lens with Demagnification for Nanolithography[J]. Opto-Electronic Engineering, 2011, 38(5): 35.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!