光学技术, 2011, 37 (3): 284, 网络出版: 2011-05-30   

大带隙二维三角格子光子晶体结构参数的优化设计

Optimization design of structure parameters of 2D triangular lattice for big photonic band gap
作者单位
1 上海理工大学 光电信息与计算机工程学院, 上海 200093
2 太原理工大学 理学院物理系, 太原 030024
摘要
光子晶体结构设计优化是理论研究的一个重要内容。运用平面波展开法对圆柱、方柱及正六边柱构造的二维三角格子光子晶体的禁带进行仿真计算, 讨论了介质材料分别为GaAs、Si和Ge情况下, 柱子形状、旋转角度、填充比的变化对完全光子禁带的影响。发现: 对于二维三角格子光子晶体, 相对于介质柱, 空气柱更易获得完全光子禁带; 而相对于圆柱及方柱, 正六边柱得到的完全禁带宽度最大, 所以二维三角格子的最优结构为Ge介质背景下的正六边空气柱, 最优结构参数为θ=18°,d/a=0.92, 最大禁带宽度Δmax=0.116(ωa/2πc), 研究结果可为今后实验制作大带隙二维三角格子光子晶体提供理论上的指导。
Abstract
Optimization design of photonic crystals is an important content of theoretically investigation. Plan Wave Expansion Method is used to simulate the photonic band gap (PBG) of 2D triangular lattice photonic crystals of circular column and square column and hexagonal column. When the dielectric materials are GaAs, Si and Ge, the influence of rods shape, rotation angle, filling rations on absolute photonic band gap are discussed. Conclusions as blow: For 2D triangular lattice photonic crystals, air rods are easier to obtain absolute PBG than dielectric rods. And compared with circular rods or square rods, hexagonal rods have the biggest complete PBG width: Δmax=0.116(ωa/2πc). In a word, for 2D triangular photonic crystals, the optimum structure is hexagonal air rods, where dielectric is Ge, d/a equals to 0.92, θ equals to 18°. This result can provide theoretical instruction for 2D triangular photonic crystals with big photonic band gap.

黄爱琴, 郑继红, 徐邦联, 杨毅彪, 庄松林. 大带隙二维三角格子光子晶体结构参数的优化设计[J]. 光学技术, 2011, 37(3): 284. HUANG Aiqin, ZHENG Jihong, XU Banglian, YANG Yibiao, ZHUANG Songlin. Optimization design of structure parameters of 2D triangular lattice for big photonic band gap[J]. Optical Technique, 2011, 37(3): 284.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!