光学学报, 2011, 31 (7): 0731002, 网络出版: 2011-06-28   

薄膜太阳能电池异型布拉格背反射结构设计与制作

Design of an Irregularly Shaped DBR for Thin Film Solar Cells
作者单位
1 中国科学院上海微系统与信息技术研究所, 上海 200050
2 中国科学院研究生院, 北京 100049
摘要
根据多光束干涉原理设计出用于薄膜太阳能电池的异型布拉格背反射器(IDBR)。该异型布拉格背反射结构由两对非晶硅(36.5 nm)/二氧化硅(81 nm)分布式布拉格反射器(DBR)结构与三对非晶硅(73 nm)/二氧化硅(162 nm)DBR结构组合而成。讨论了不同结构的背反射器性能,分析了IDBR中心波长与层数的选择依据。采用迭代法计算了IDBR的反射性能。用等离子体增强化学气相沉积法(PECVD)在硅衬底上生长出具有5对α-SiH/SiO2结构的IDBR,并测试其反射光谱曲线。实验证明该反射器在420~1400 nm的光谱范围内设计反射率达到87%,在600~1300 nm波长范围内的平均反射率高达91.6%,从而具有显著提高太阳能电池的宽谱吸收效率的潜力。
Abstract
The irregularly shaped distributed Bragg reflector (IDBR) for thin film solar cell is designed according to the theory of multi-beam interference, contains two pairs of α-SiH(36.5 nm)/SiO2(81 nm) distributed Bragg reflector (DBR) and three pairs of α-SiH(73 nm)/SiO2(162 nm) DBR. Different structures of back reflector are discussed. The criterion to choose the central wavelength and pairs of DBR is analyzed. The method of iteration is used to calculate the reflectivity. The IDBR is fabricated by plasma enhanced chemical vapor deposition (PECVD) on a silicon wafer. The experimental result shows that the average reflectivity of IDBR is 87% in the spectral range of 420~1400 nm, and is as high as 91.6% from 600~1300 nm. The result indicates that this design has the potential to enhance the light absorption for thin film solar cells in broad band.

周舟, 周健, 孙晓玮, 谈惠祖. 薄膜太阳能电池异型布拉格背反射结构设计与制作[J]. 光学学报, 2011, 31(7): 0731002. Zhou Zhou, Zhou Jian, Sun Xiaowei, Tan Huizu. Design of an Irregularly Shaped DBR for Thin Film Solar Cells[J]. Acta Optica Sinica, 2011, 31(7): 0731002.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!