光电工程, 2011, 38 (6): 18, 网络出版: 2011-07-04   

基于植被表面的激光测高仪回波波形模型化分析

Modeling Raw Signals of Laser Altimeter Echo
作者单位
1 中国科学院安徽光学精密机械研究所, 合肥 230031
2 中国科学院合肥智能机械研究所, 合肥 230031
摘要
针对激光测高仪中发射的激光脉冲并不是高斯对称的, 并且由于目标物的影响, 使用一系列标准高斯函数的和来拟合回波脉冲并不精确, 本文提出改变回波分解的取模模型, 通过正确模型的选取来改善回波位置的精确度。该方法采用比高斯函数复杂的对数正态函数和广义高斯函数, 采用 LM非线性拟合算法拟合回波波形。实验结果表明, 通过对植被等回波数据的拟合显示出针对不同的地形存在不同的改善效果, 同时新参数的引入可获得波形的额外信息, 使得对目标物表面几何形状、反射率和粗糙度等信息的解算变得更为容易。Waveform Based on Canopy Surface
Abstract
It has been demonstrated that decomposing the return waveforms into a mixture of Gaussian components was suitable to achieve the information of the target. But the laser impulse is slightly asymmetric, and approximating the waveforms by using a sum of Gaussians may not be an accurate representation depending on the application and target. This paper focus on the improvement of raw signal modeling and re.ne peak detection greatly increased the number of detected targets as well as their positional accuracy. More complex models than the Gaussian model, such as the Lognormal or generalized Gaussian functions, were introduced and. tted with backscatter waveform of canopy to improve the raw signal by LM algorithm. The results show, through introduction of new echo parameters, it is easy to extract the additional information on the target shape, and calculate reflectivity and roughness.

赵欣, 张毅, 王相京, 涂碧海, 赵平建, 张黎明. 基于植被表面的激光测高仪回波波形模型化分析[J]. 光电工程, 2011, 38(6): 18. ZHAO Xin, ZHANG Yi, WANG Xiang-jing, TU Bi-hai, ZHAO Ping-jian, ZHANG Li-ming. Modeling Raw Signals of Laser Altimeter Echo[J]. Opto-Electronic Engineering, 2011, 38(6): 18.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!