强激光与粒子束, 2011, 23 (6): 1553, 网络出版: 2011-07-04   

夹持方式对KDP晶体三倍频转换效率的影响

Influence of clamping modes in KDP crystal on conversion efficiency of third harmonic generation
作者单位
1 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
2 四川大学 电子信息学院, 成都 610041
摘要
针对压条固定方式、粘胶固定方式和全外围夹持方式进行理论建模和数值计算分析,并讨论了不同夹持方式的优缺点及其对KDP晶体面形和三倍频转换效率的影响。研究结果表明:晶体面形形变对高斯光束三倍频转换效率的影响明显小于平面波时的情况。当入射基频光光强为6 GW·cm-2时,对于平面波的情况,压条固定方式、粘胶固定方式和全外围夹持方式3种夹持方式相对于不考虑夹持作用时的三倍频转换效率分别减小7.5%,9.0%和7.2%;对于高斯光束的情况,三倍频转换效率分别减小了1.3%,1.0%和1.5%。
Abstract
Theoretical modeling has been used to discuss advantages and disadvantages among the squash fixed mode, the silica fixed mode and the complete periphery clamping mode in this paper. Besides, numerical calculation has been used to analyze the influence on KDP surface and conversion efficiency. The results show that the conversion efficiency reduction of Gaussian beam is less than that of plane wave caused by surface deformation. when the intensity of fundamental frequency laser is up to 6 GW·cm-2, the conversion efficiencies reduce 7.5%, 9.0% and 7.2% to plane wave, respectively; and the conversion efficiencies reduce 1.3%, 1.0% and 1.5% to Gaussian beam, respectively.

贾凯, 袁晓东, 徐旭, 曹庭分, 熊召, 崔凯洪, 徐攀, 张彬. 夹持方式对KDP晶体三倍频转换效率的影响[J]. 强激光与粒子束, 2011, 23(6): 1553. Jia Kai, Yuan Xiaodong, Xu Xu, Cao Tingfen, Xiong Zhao, Cui Kaihong, Xu Pan, Zhang Bin. Influence of clamping modes in KDP crystal on conversion efficiency of third harmonic generation[J]. High Power Laser and Particle Beams, 2011, 23(6): 1553.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!