光子学报, 2011, 40 (7): 1051, 网络出版: 2011-08-10   

大出瞳自由曲面头盔显示器光学系统的设计

Design Method of a Freeform HMD System with Large Pupil Size
作者单位
上海理工大学 光电信息与计算机工程学院,上海 200093
摘要
头盔显示器系统由于自身对尺寸和重量有严格要求,采用自由曲面器件可以起到减少透镜片数,从而缩小系统尺寸、减轻重量等作用.针对目前单片式自由曲面棱镜解决方案存在的出瞳直径小,棱镜自由曲面光学面加工定位困难等问题,介绍了一种大出瞳自由曲面头盔显示器光学系统的设计方法,并给出了设计结果.设计方案采用了自由曲面棱镜和薄透镜的双片式结构,棱镜和薄透镜都各自含有一个平面光学面,有效降低了加工难度,同时薄透镜与显示器可以作为一个整体调整,不增加装调难度,采用0.61寸微型显示器,对角视场45°,出瞳直径达到了10 mm.
Abstract
Usually, freeform optical surfaces do not have rotational symmetry compared with traditional spherical and aspheric elements, so they have more freedom for system design. In some optical systems which have strict package requirements, such as overall length, weight and volume etc., freeform optical elements can help to satisfy these requirements through reducing lens number of the system. In this paper, the design method of freeform optical elements was introduced, and proposed several design examples of the optical system were proposed which adopted freeform optical elements. From these design examples, the advantages of using freeform optical elements could be proved. The size of the microdisplay used is 0.61 inch and FOV is 45°. The exit pupil diameter is 10 mm.

杨波, 韦晓娜, 张薇, 庄松林. 大出瞳自由曲面头盔显示器光学系统的设计[J]. 光子学报, 2011, 40(7): 1051. YANG Bo, WEI Xiaona, ZHANG Wei, ZHUANG Songlin. Design Method of a Freeform HMD System with Large Pupil Size[J]. ACTA PHOTONICA SINICA, 2011, 40(7): 1051.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!