半导体光子学与技术, 2009, 15 (1): 30, 网络出版: 2011-08-19  

Reduction Bending of Thin Crystalline Silicon Solar Cells

Reduction Bending of Thin Crystalline Silicon Solar Cells
作者单位
Solar Energy Research Institute, Yunnan Normal University, Kunming 650092, CHN
摘要
Abstract
Reported are the results of reduction the bending of thin crystalline silicon solar cells after printing and sintering of back electrode by changing the back electrode paste and adjusting the screen printing parameters without effecting the electrical properties of the cell. Theory and experiments showed that the bending of the cell is changed with its thickness of substrate, the thinner cell, the more serious bending. The bending of the cell is decreased with the thickness decrease of the back contact paste. The substrate with the thickness of 190μm printing with sheet aluminum paste shows a relatively lower bend compared with that of the substrate printing with ordinary aluminum paste, and the minimum bend is 0.55 mm which is reduced by 52%.

SHEN Lan-xian, LIU Zu-ming, LIAO Hua, TU Jie-lei, DENG Shu-kang. Reduction Bending of Thin Crystalline Silicon Solar Cells[J]. 半导体光子学与技术, 2009, 15(1): 30. SHEN Lan-xian, LIU Zu-ming, LIAO Hua, TU Jie-lei, DENG Shu-kang. Reduction Bending of Thin Crystalline Silicon Solar Cells[J]. Semiconductor Photonics and Technology, 2009, 15(1): 30.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!