激光与光电子学进展, 2011, 48 (10): 101603, 网络出版: 2011-08-22   

组合单元频率选择表面的设计研究

Design and Study of Combination Element Frequency Selective Surface
作者单位
1 兰州理工大学甘肃省有色金属新材料省部共建国家重点实验室, 甘肃 兰州 730050
2 长江大学化学与环境工程学院, 湖北 荆州 434023
摘要
利用谱域分析法研究了Y形与圆孔形组合单元频率选择表面(FSS)结构参数对频率响应特性的影响。该组合单元的频率响应特性同时兼有带通和带阻的双带特性。与其他结构参数相比,Y形单元的臂长对FSS频率响应特性具有至关重要的影响,臂长由2.0 mm增加至3.5 mm,带通谐振频率向低频漂移了4.2 GHz,带阻谐振频率向低频率漂移了7.0 GHz,在-5 dB的通带传输带宽减少了6.6 GHz,阻带传输带宽增加了4.4 GHz。
Abstract
The effects of structure parameters of substrate on the frequency response characteristics of combination element frequency selective surface (FSS) which assembles Y element and circular aperture element are studied using the spectral domain method. Frequency response characteristics of the combination element FSS show double-band characteristic including band pass and band stop. Arm-length of Y element has a very important effect on FSS frequency response characteristic, compared with other parameters. When the arm-length is increased from 2.0 mm to 3.5 mm, the resonant frequency of band pass is drifted by 4.2 GHz and the resonant frequency of band stop is drifted by 7.0 GHz to low frequency, the transmission bandwidth of band pass is decreases by 6.6 GHz and the bandwidth of band stop increases by 4.4 GHz at -5 dB.

曲宝龙, 李旭东, 张自斌, 朱鹏刚. 组合单元频率选择表面的设计研究[J]. 激光与光电子学进展, 2011, 48(10): 101603. Qu Baolong, Li Xudong, Zhang Zibin, Zhu Penggang. Design and Study of Combination Element Frequency Selective Surface[J]. Laser & Optoelectronics Progress, 2011, 48(10): 101603.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!