强激光与粒子束, 2011, 23 (8): 2183, 网络出版: 2011-09-20  

兰州重离子加速器分时供束的Chopper模式解析

Chopper mode analysis of beam distribution based on time in HIRFL
作者单位
1 中国科学院 近代物理研究所, 兰州 730000
2 中国科学院 研究生院, 北京 100039
摘要
介绍了兰州重离子加速器分时供束系统中Chopper模式解析子系统的体系结构及硬件组成,分析了软件需求,并采用多线程技术设计了Chopper模式解析程序。首先使用NI-DAQmx函数实时读取PXI6133数据采集卡上采集的Chopper模式脉冲,然后对其作进一步分析,最后使用TCP/IP协议将相应的工作模式控制指令发送给控制器。设计的程序达到了系统要求,实现了Chopper模式自动转换的功能,并通过了现场测试。
Abstract
Chopper is an important equipment in beam distribution system based on time of heavy ion research facility in Lanzhou(HIRFL). This paper introduces its mode analysis system’s architecture and hardware composition, analyzes corresponding software requirements, and designs the mode analysis program using multithreading technology. Firstly the program reads mode pulse data of chopper from data acquisition card by NI-DAQmx function, then uses the data for further analysis, and finally sends corresponding work mode control instruction to chopper controller through TCP/IP protocol. The designed program meets system requirements, realizing the function of chopper mode automatic conversion, and has passed the field test.

姜子运, 张玮, 安石, 陈云, 武俊奇, 杨锋, 顾可伟, 李朋. 兰州重离子加速器分时供束的Chopper模式解析[J]. 强激光与粒子束, 2011, 23(8): 2183. Jiang Ziyun, Zhang Wei, An Shi, Chen Yun, Wu Junqi, Yang Feng, Gu Kewei, Li Peng. Chopper mode analysis of beam distribution based on time in HIRFL[J]. High Power Laser and Particle Beams, 2011, 23(8): 2183.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!