光学 精密工程, 2011, 19 (9): 2029, 网络出版: 2011-10-11   

共光路径向剪切干涉仪的设计

Design of common path radial shearing interferometer
何煦 1,2,*马军 1
作者单位
1 中国科学院 长春光学精密机械与物理研究所,吉林 长春 130033
2 中国科学院 研究生院,北京 100039
摘要
针对常规像移式干涉仪无法用于大口径、长光路光学系统波像差检测的工程问题,设计了共光路径向剪切干涉仪以消除采用标准波面所引入的系统误差。设计中采用由三角棱镜与斜方棱镜组合而成的胶合棱镜组作为波面剪切器件,将待测波面与其复制波面产生干涉,并通过一组有不同相对孔径的透镜切换装置来控制干涉仪剪切比。与4D动态干涉仪在不同条件下的比对试验数据表明,设计的剪切干涉仪的测试重复精度约为λ/80,实际测试精度RMS优于λ/20(λ=630 nm)。这种设计极大地缩小了仪器外形尺寸与重量,提高了超长光路干涉检测的效率。
Abstract
As conventional phase shifting interferometers can not test the wavefront aberration from a large diameter and long optical path system accuracely, a new commonpath shearing interferometer is designed to elimnate the system error introduced by the standard wavefront. The new design takes an agglutination prism consisting of a triangular prism and a rhombic prism as a shear device to produce interference by the wavefront under-test with its replication. A group of different relative aperture lens switching devices are used to control the shearing ratio of the shearing interferometer. Compared with the data from 4D dynamic interferometers under different temperature conditions,it shows that the repeatability of designed shearing interferometer is about λ/80 and the accuracy of root mean square is better than λ/80(λ=630 nm). The design of the commonpath shearing interferometer greatly reduces its dimension and weight and also improves the experiment efficiency for long optical path interference measurement.

何煦, 马军. 共光路径向剪切干涉仪的设计[J]. 光学 精密工程, 2011, 19(9): 2029. HE Xu, MA Jun. Design of common path radial shearing interferometer[J]. Optics and Precision Engineering, 2011, 19(9): 2029.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!