红外技术, 2011, 33 (9): 521, 网络出版: 2011-10-13   

高精度杂散光测量系统分析

High-precision Stray Light Measurement System Analysis
作者单位
上海技术物理研究所,上海 200083
摘要
为了满足空间遥感技术的发展,杂散光测量系统要求有更低的测量阈值,更高的测量精度。现有的杂散光测量系统分为两类,分别为面源法(黑斑法)和点源法。文中将这两种方法概括为几个主要的模块,分析各个模块的实现方式及其对测量阈值、精度的影响。通过对测量系统实现方式的分析,提出控制测量系统阈值及精度的措施。为低阈值,高精度杂散光测量系统的研制奠定基础。如果按照文中提出的最严格的环境控制策略控制测量系统的背景辐射,测量系统可测的最低阈值可以达到 10-15;如果测量阈值要求不高,采用较宽松的控制策略就可以使测量阈值达到 10-5。
Abstract
In order to meet the development demand of space remote sensing technology, stray light measurement system requires a lower threshold and higher accuracy. Now, there are two ways to measure the stray light, respectively, surface source method (black spot method) and the point source method. This paper summarizes these two methods into several main sections, analyzes the implementation of each section and the impact of them on the threshold and measurement accuracy. Through the analysis of the measurement system, we can get the way to control the threshold and precision of the measurement system. The results of this paper can provide some reference for the development of the low threshold, high-precision stray light measurement system. If the background radiation of measuring system is controlled by the most strict environment control strategy, the measuring threshold can reach to 10-15. If the requirement of the measuring threshold is not too high, a looser environment control strategy is enough to make the threshold reaching 10-5.

李晓平, 王钢, 胡亭亮. 高精度杂散光测量系统分析[J]. 红外技术, 2011, 33(9): 521. LI Xiao-ping, WANG Gang, HU Ting-liang. High-precision Stray Light Measurement System Analysis[J]. Infrared Technology, 2011, 33(9): 521.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!