强激光与粒子束, 2011, 23 (9): 2377, 网络出版: 2011-10-27   

高功率激光整形脉冲波形控制技术

Waveform control technique of high power laser pulse shaping
作者单位
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
针对神光Ⅲ原型装置物理实验要求的三台阶整形脉冲(三个台阶的脉冲宽度比为1.5∶1.0∶0.5,强度比为1∶4∶16,脉冲总能量为500 J),并根据该装置的系统构成和具备任意脉冲整形技术,开展了高功率激光整形脉冲波形控制技术研究,通过对基频光段的增益饱和效应和三倍频光的频率转换过程的分析,获得了脉冲时间波形在传输、放大及频率转换过程中的一些变化特点,在此基础上建立了一套简单的预测模型。经过反复迭代计算和多次全系统联机实验获得了实验结果,并在物理实验中得到了应用,初步形成了高功率激光整形脉冲波形的控制方法。
Abstract
In order to achieve threestep pulse shaping (time proportion 1.5 ns∶1.0 ns∶0.5 ns, power proportion 1∶4∶16, total energy 500 J) required by the physical experiments on ShenguangⅢ technical integration experimental line(TIL), some researches on waveform control of high power laser pulse shaping have been done on the basis of TIL system structure and the technology which can form arbitrary pulse waveform. By analyzing gain saturation effect and frequency conversion process, the paper gets the pulse change in transmission, amplification and frequency conversion processes, and builds a simple prediction model. Good experimental results are obtained by pulse waveform predicting, pulse shaping and repeated iteration of laser emission data, and used in the physical experiments. A preliminary waveform control method of high power laser pulse shaping is gained.

李海, 梁樾, 赵润昌, 李平. 高功率激光整形脉冲波形控制技术[J]. 强激光与粒子束, 2011, 23(9): 2377. Li Hai, Liang Yue, Zhao Runchang, Li Ping. Waveform control technique of high power laser pulse shaping[J]. High Power Laser and Particle Beams, 2011, 23(9): 2377.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!