光学与光电技术, 2011, 9 (5): 75, 网络出版: 2011-11-24   

大功率LED脉冲位置调制解调设计

Design of Pulse Position Modulation with High Power LED
作者单位
1 武汉光电国家实验室(筹),华中科技大学光电子科学与工程学院, 湖北 武汉 430074
2 衡阳师范学院物理与电子信息科学系, 湖南 衡阳 421008
摘要
脉冲位置调制是室内可见光通信的主要调制方式之一,它具有功率利用率高,频带利用率好,抗干扰性强的特点。为实现室内大功率白光LED照明通信,在分析PPM的原理基础上提出了一种改进的调制方式,给出了这种PPM符号的结构,并设计了大功率LED的驱动电路。其主要特点是由单片机直接输出帧同步信号加PPM信号,不设置保护时隙,其利用LED不发光的位置信息传输信号。实验结果表明该PPM调制方式能兼顾室内照明和通信功能。
Abstract
Pulse position modulation(PPM) is the most popular modulation for indoor visible light communication with high power LED, which has the advantage of high efficient of power, low bandwidth and performance of anti-interference. In order to implement indoor visible light communication with high power LED as well as indoor lighting, the paper presents an improved PPM by analysis on the principle of regular modulator approach, and gives the scheme of the PPM symbol, also has designed the driving circuit of high power LED. Its main characteristics are directly output the PPM signal and the frame synchronization signal by microchip controller. There is no protection time slot, and transmits information without sending light pulse. The experimental results show that the PPM modulation can be lamination and communications.

谭家杰, 杨克成, 夏珉. 大功率LED脉冲位置调制解调设计[J]. 光学与光电技术, 2011, 9(5): 75. TAN Jia-jie, YANG Ke-cheng, XIA Min. Design of Pulse Position Modulation with High Power LED[J]. OPTICS & OPTOELECTRONIC TECHNOLOGY, 2011, 9(5): 75.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!