强激光与粒子束, 2011, 23 (12): 3207, 网络出版: 2012-01-04   

计算机控制光学表面成形中大规模驻留时间求解

on Large-scale dwell time algorithm for computer controlled optical surfacing
作者单位
中国工程物理研究院 机械制造工艺研究所, 四川 绵阳 621900
摘要
采用基于稀疏矩阵的大规模非负最小二乘法,对大口径、微浮雕结构光学元件加工中的驻留时间进行了分析与求解,并对该算法开展了正则化研究。仿真结果表明: 与传统非负最小二乘法相比,基于稀疏矩阵的大规模非负最小二乘法精度高、效率快。采用该算法仿真加工平均振幅为1.177 6倍波长的大口径、微浮雕结构光学元件,误差面形均方根收敛至0.067倍波长。
Abstract
This paper uses a non-negative least-squares method based on sparse matrix, to solve the dwell time in computer controlled optical surfacing(CCOS) of optical elements with large diameter and microstructure, and the regularization of the method is researched. The simulation results reveal that the large-scale non-negative least-squares method based on sparse matrix has higher accuracy and efficiency, in contrast with the traditional non-negative least-squares method. The RMS of surface residual error converges to 0.067 wavelength, when the method is used to simulate the manufacturing of an optical workpiece with large diameter, microstructures and average surface amplitude of 1.177 6 wavelength.

罗丽丽, 何建国, 王亚军, 张云飞, 黄文, 吉方. 计算机控制光学表面成形中大规模驻留时间求解[J]. 强激光与粒子束, 2011, 23(12): 3207. Luo Lili, He Jianguo, Wang Yajun, Zhang Yunfei, Huang Wen, Ji Fang. on Large-scale dwell time algorithm for computer controlled optical surfacing[J]. High Power Laser and Particle Beams, 2011, 23(12): 3207.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!