激光与光电子学进展, 2012, 49 (4): 041403, 网络出版: 2012-03-01   

激光重熔对TC4钛合金表面激光原位熔覆层微观组织与性能的影响

Effect of Laser Remelting on Microstructure and Properties of In-Situ Coating by Laser Cladding on TC4 Titanium Alloy
作者单位
1 南华大学机械工程学院, 湖南 衡阳 421001
2 南华大学电气工程学院, 湖南 衡阳 421001
摘要
为了进一步提高激光原位熔覆层的质量,利用激光重熔方法对TC4钛合金表面激光原位熔覆层进行了处理。采用扫描电镜(SEM)、X射线衍射仪(XRD)和显微硬度计分别对比研究了熔层的显微组织、相分布和显微硬度。结果表明,适当工艺参数的激光重熔处理可以消除位于原位熔覆层底部的大气孔,可以使熔层中的陶瓷相分布更均匀,从而提高熔层的组织致密性;激光重熔处理后熔层硬度值的梯度变化减弱,熔层的平均显微硬度与质量的稳定性均得到提高。
Abstract
In order to improve the in-situ synthesized coating quality by laser cladding, in-situ laser cladding coating on TC4 titanium alloy surface is processed by laser remelting. Microstructure, phase, and microhardness of the coatings are studied by scanning electron microscope (SEM), X-ray diffractometer (XRD) and micro-hardness tester. The results show that the pore of in-situ coating bottom is eliminated and the ceramic phase of coating is distributed homogeneously by laser remelting so that microstructure becomes denser. After laser remelting, the microhardness gradient is reduced. The average microhardness and coating quality are enhanced by laser remelting.

林英华, 李月华, 陈志勇, 朱卫华, 文向东, 王新林. 激光重熔对TC4钛合金表面激光原位熔覆层微观组织与性能的影响[J]. 激光与光电子学进展, 2012, 49(4): 041403. Lin Yinghua, Li Yuehua, Chen Zhiyong, Zhu Weihua, Wen Xiangdong, Wang Xinlin. Effect of Laser Remelting on Microstructure and Properties of In-Situ Coating by Laser Cladding on TC4 Titanium Alloy[J]. Laser & Optoelectronics Progress, 2012, 49(4): 041403.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!