光电技术应用, 2012, 27 (2): 70, 网络出版: 2012-05-08   

烟幕消光效能试验测量方法研究

Research on Measuring Method of Smoke Extinction Efficiency Test
作者单位
1 海军航空工程学院, 山东 烟台 264001
2 烟台警备区司令部,山东 烟台 264001
摘要
利用发烟罐结合外场运动目标,进行外场烟幕的消光和遮蔽效果试验,通过多光谱成像传感器采集数据,验证和修正烟幕的消光模型。得到的试验数据经过分析及与烟幕经典理论计算方法对比,得到了其消光效果规律,符合工程经验值。在外场试验过程中采集了包括可见光、红外中波和长波成像传感器和激光功率计相关测量数据,为烟幕的使用和对成像传感器影响效果提供了依据。
Abstract
Combining with the moving target in the field, the smoke pot is used for the efficiency test of the smoke extinction and screening in the field. The smoke extinction model is modified and verified by the data acquisition from the multi-spectra imaging sensor. The obtained experimental data are analyzed and compared with the calculation method of the smoke classical theory, and the experimental principle is obtained and proved to meet the engineering experience value. The measurement data about the visible sensor, mid-wave infrared sensor, long wave imaging sensor and laser power meter are collected during the field test, which provides the basis for the smoke application and the imaging sensor efficiency.

陆斌, 吕俊伟, 孙晓颖. 烟幕消光效能试验测量方法研究[J]. 光电技术应用, 2012, 27(2): 70. LU Bin, LV Jun-wei, SUN Xiao-ying. Research on Measuring Method of Smoke Extinction Efficiency Test[J]. Electro-Optic Technology Application, 2012, 27(2): 70.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!