强激光与粒子束, 2012, 24 (2): 379, 网络出版: 2012-05-08   

三聚氰胺-甲醛气凝胶模板的结构与热稳定性

Structure and thermal stability of melamine-formaldehyde aerogel template
作者单位
1 四川大学 原子与分子物理研究所, 成都 610065
2 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
采用溶胶-凝胶法合成出三聚氰胺-甲醛(MF)有机气凝胶,并通过N2吸附、红外光谱以及热重-质谱联用等实验技术对该气凝胶的多孔形态、结构特性和热稳定性进行了表征。结果表明:MF气凝胶是一种连续的、相互贯通的3维多孔网络结构材料,比表面积约842 m2/g,平均孔径为16 nm左右;热解产生了NO, H2O, NH3, NO2, CO2和CH4气体,很好地诠释了各阶段失重,其总失重高达97%,有望作为制备3维nm级多孔材料的模板。
Abstract
Organic aerogels were fabricated by sol-gel polymerization of melamine and formaldehyde monomers. The porous morphology, structure and thermal stability of the aerogels were characterized by nitrogen adsorption, Fourier transform infrared spectroscopy(FTIR) and thermogravimetry-mass spectrometry(TG-MS). The results show that melamine(M)-formaldehyde(F) aerogel is a material of continuous, interpenetrant, three-dimensional network structure with a high surface area, whose corresponding specific surface is roughly 842 m2/g, and average pore size is 16.04 nm. The pyrolysis process releases several gaseous products, including NO, H2O, NH3, NO2, CO2 and CH4, which is conformed with TG curves, and nearly 97% of MF is decomposed in all. The aerogel is expected to be employed as the template to obtain three-dimensional nanoporous materials.

孙志鹏, 王朝阳, 韦建军, 付志兵, 张厚琼, 杨曦, 唐永建. 三聚氰胺-甲醛气凝胶模板的结构与热稳定性[J]. 强激光与粒子束, 2012, 24(2): 379. Sun Zhipeng, Wang Chaoyang, Wei Jianjun, Fu Zhibing, Zhang Houqiong, Yang Xi, Tang Yongjian. Structure and thermal stability of melamine-formaldehyde aerogel template[J]. High Power Laser and Particle Beams, 2012, 24(2): 379.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!