中国激光, 2012, 39 (7): 0703002, 网络出版: 2012-05-18
激光机械复合修整超硬磨料砂轮研究
Research on Laser and Mechanical Compound Truing and Dressing of Superabrasive Grinding Wheels
激光技术 激光机械复合修整 有限元仿真 参数优化 青铜结合剂 laser technique laser and mechanical compound truing and dressing finite element simulation parameters optimization bronze bond
摘要
为了解决超硬磨料砂轮修整困难的难题,采用激光机械复合修整法,通过对青铜结合剂的去除过程进行多脉冲有限元仿真,优化激光粗修工艺的激光参数及确定激光粗修工艺过程砂轮圆跳动所能达到的范围。根据仿真结果选择了修整实验条件下激光粗修的激光参数,并对烧结成型的青铜金刚石砂轮进行了激光机械复合修整实验。结果表明在合适的工艺参数下,激光机械复合修整法是一种有效的修整方法。
Abstract
To solve the problem that truing and dressing of superabrasive grinding wheels are very hard, a method which is called "laser and mechanical compound truing and dressing" is used. Multiple-pulse finite element simulation is done to optimize laser parameters during laser rough trimming and reach a certain circular runout range of grinding wheels after laser rough trimming. Through simulation results, laser parameters of laser rough trimming are selected. Then, laser and mechanical compound truing and dressing experiments are done for bronze-bonded diamond grinding wheel which is just die-casting molding. Results show that if appropriate technological parameters are selected, laser and mechanical compound truing and dressing is an effective method.
陈根余, 卜纯, 邓辉, 贾天阳, 李时春. 激光机械复合修整超硬磨料砂轮研究[J]. 中国激光, 2012, 39(7): 0703002. Chen Genyu, Bu Chun, Deng Hui, Jia Tianyang, Li Shichun. Research on Laser and Mechanical Compound Truing and Dressing of Superabrasive Grinding Wheels[J]. Chinese Journal of Lasers, 2012, 39(7): 0703002.